1 / 2
Filament Spool Rack (RepRack) for wood blocks 30x40
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using cheap wood blocks (30x40mm) to create a Filament Spool Rack.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I had wooden bars 20X40 and had no time to buy pipes. I made this model and decided to share. I used three holders for one shelf 1.5 m long.
I added .3mf in it at once a set (mounting on a wall, modified by the author - https://www.printables.com/model/1025197-reprack-cleat-for-10-screws), as well as the holder of wooden beams itself. And also separately .stl - only the holder itself.
I Printed :
- PETG
- 0,4 nozzle
- 0.3 layer height
- 4 wall loops
- 10% Cross Hatch
Material required:
- 2x wood blocks 20 x 40 mm (The holes are made with a gap of 32x42mm), in your required length
- 2x wood screws per hanger: 3,5 x 16 mm to fix wood
- 2x wall screws per cleat, the screw type would depend on your wall type