1 / 1
RepRack 20mm bracket for Twin Slot Shelving
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for RB UK Twin Slot Shelving from ScrewFix. I have included the STEP file for easy modification.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (13)Powiązane
I have based my design off of Rene's 20mm RepRack design, however I have adapted it to work with RB UK Twin Slot Shelving, which I previously purchased from Screwfix and already use extensively for shelving. It's a slightly tight fit but it does seem to work well. Best printed on its side for maximum strength, with some support for the slot hooks
I purchased some electrical conduit (also from ScrewFix) for my rails.
