Phone holder - Skoda Octavia I
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is phone holder for Skoda Octavia I.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 379
- Wydruki
- 2
- Wyświetlenia
- 5741
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is phone holder for Skoda Octavia I.
It is meant to be mounted as replacement for blind buttons.
Two versions are available.
One with integrated USB charger and one without.
I used simple custom board with usb connector and cheap buck converter for charger.
Some custom supports are needed for clips.
I do not recommend to print this with PLA due to high temperatures in a car.
I recommend to glue some non slippery material to the bottom (I used rubber and it's OK even at sharp corners while driving)
Sorry for the STL orientation.
Feel free to improve ;)
https://cad.onshape.com/documents/6d34144eddf47c0a872ced8d/w/dc4c2466572852ffc2538478/e/182e247c92900ca5ce4debee?renderMode=0&uiState=6315bb574c1aa7131682cf6d
Enjoy!
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
ANY PETG, ABS
Category: Automotive