Creality K1 Series 10 mm Drag Chain Upgrade (with FreeCAD Files)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10mm Drag Chain Upgrade which fully fixes the speed bump Issue with OEM chain and allows for PTFE tube pass through!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 269
- Wydruki
- 1
- Wyświetlenia
- 1922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
After spending a solid week dealing with the drag chain issues on my Creality K1 Max—caused by low tolerances in the chain's joints—I began testing various user-made solutions on Printables. Some worked, while others didn’t. Ultimately, I was searching for a solution that closely resembled the OEM design, with an emphasis on reliability and longevity. I also wanted a solution that would seamlessly integrate the PTFE tube, ensuring consistent filament flow without any crimping of the tube.
I’ve had the 10 mm x 10 mm drag chain upgrade installed on my K1 Max for over a week now, with nearly 30 printing hours on it. So far, there hasn't been a single issue, and I don’t expect any long-term problems. The drag chain I used was purchased from my local 3D printer distributor. It is fully enclosed, with very high tolerances in the joints, which prevents any drooping, unlike the OEM part. While I can't speak to how the cheaper Amazon options compare, I'll share the chain I used below. The upgrade from the 7 x 7 mm chain to the 10 x 10 mm chain also provides enough space to feed the PTFE tube through the drag chain, preventing crimping. To further ensure this, I've installed the Creality K1/K1 Max PTFE tube guide by @brucemoore on my K1 Max extruder.
3dprintingcanada.com/products/drag-chain-10x10
I highly recommend printing in PETG. This material reduces friction between the drag chain bolt and helps prevent the fastener from gradually loosening over time. ABS and ASA will also work, but PLA will warp quickly due to the heat in the chamber. The print configuration files are included in the download.
Update - August 19, 2025
As requested by the community, I have updated the 10 mm Drag Chain Mount file to have a regular left height of 7.5 mm, along with new models with lifted height of 15 and 22.5 mm. The 15 and 22.5 mm models have not been test yet, as it would not be applicable in my current setup, so implement at your own risk.
After 8 months of usage, the original PETG print that i was using was a to flexible over time and ended us breaking when i was working on my K1 Max. Recently printed the new updated model in PETG-CF and it is working amazing, especially with the new models height.
Note: I am a huge believer in open-source and ease of access, so I'll be posting the FreeCAD files on my GitHub. Feel free to modify the files in any way that meets your needs and posting them to Printables! :)
github.com/MJC17/Creality-K1-Series-10-mm-Drag-Chain-Upgrade
Warning: Only attempt this upgrade if you know what you’re doing.