Waterproof BIG RC Reciever box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a bigger Reciever box to fit larger Recievers like the DumboRC 10ch and all the wires. Should be waterproof.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 211
- Wydruki
- 1
- Wyświetlenia
- 813
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a bigger Reciever box to fit larger Recievers like the DumboRC 10ch for my RC Crawler.
In theory waterproof and seems to work well in my rig.
This was designed for HB R1001/ Traxxas TRX4 but should be possible to use in any RC as long as the dimensions fit.
L:100mm W:47mm H:42mm
You can use some silicone around the lid and the wire caps if you really want it to be as waterproof as possible. I have tried driving in deep water with it submerged for a few minutes and it haven't let any water in.
You will need:
-M3x12mm (x8)
-EVA Rubber seal 10x6mm 36mm long (x4)
-3mm antenna tube