Case for ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395) for smart home usage (ESPHome)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A small box created to fit a ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395), in my case for use with ESPHome. It has a snap fit lid with slots to make it easier to get off again. I've added my parameterized Fusion360 file for easier remixing.
The box has a snug fit for the ESP32, so it doesn't shift when inserting the USB C cable. It also has little slots which can fit the pins on the mmWave sensor into if they are soldered on. This makes it a little hard to disassemble, but this can still be done with relative ease poking the sensor from the bottom, through the hexagons on the side.
Note that I've rounded the corners of the case and the USB port a bit more after printing the models I've taken pictures of.