Brush Stand | Stojánek na štětce
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact, easy-to-assemble brush holder for artists. No supports needed. Disassemblable for storage. Contact for details!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This brush holder is a practical and functional accessory for any artist. It is designed for easy 3D printing without support structures, saving both time and material. After printing, the assembly is straightforward: simply push the screw through the top plate, secure it into the rod, and tighten it with a standard screwdriver. The rod strengthens the construction and prevents the top plate from bending. Its disassemblable design allows for convenient storage when not in use. Recommended printing settings include a 0.4 mm nozzle and 0.2 mm layer height. For optimal results, print the top plate with 10% infill and the rod with the screw at 80% infill. If you need assistance or file adjustments, feel free to contact me.
----------------------------------------------------------------------------------------------------------------
Tento stojánek na štětce je praktický a funkční doplněk pro každého, kdo se věnuje malování. Je navržen tak, aby jeho tisk probíhal snadno a bez podpěrných struktur, což šetří čas i materiál. Po vytištění lze stojánek snadno sestavit: stačí protlačit šroub vrchní deskou, upevnit jej do tyčky a dotáhnout pomocí klasického šroubováku. Tyčka slouží k zpevnění konstrukce a brání prolomení vrchní desky. Design je rozebíratelný, takže stojánek můžete jednoduše uložit, pokud jej zrovna nepoužíváte. Doporučené nastavení tisku zahrnuje trysku 0,4 mm a vrstvu 0,2 mm. Pro optimální výsledky je vhodné tisknout desku s 10% výplní a tyčku s šroubem na 80%. Pokud potřebujete pomoc nebo úpravu souborů, neváhejte mě kontaktovat.
Update: 12/31/2024 - Round version added