Blink Mini Camera Mount for Prusa XL Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swivel, swing-away Blink Mini camera mount for the Prusa XL enclosure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The Blink Mini camera is a cheap remotely accessible 1080p HD camera great for monitoring your print in progress. This mount is designed to attach to the lower two existing holes on the Prusa XL enclosure with arms to accommodate a left or right-side installation. The printable mount adapter allows you to snap the camera onto the mount via the two mounting provisions on the camera. The printable ball joint allows for the adjustable orientation of the camera. The arm can easily swing away to allow the opening and closing of the lid of the Prusa enclosure. Additionally, I have included a 1/4"-20 threaded ball base if you want to mount the camera on tripod or a different style of mount.
The parts are best printed with PETG filament, 0.4mm nozzle, 0.2mm layer height, 2 to 3 perimeters, 15% infill, supports for the base mount and brim for the ball joint.
You will need in addition to the printed parts, the following:
Qty three (3) M3x8 flat head screws for mounting base to XL enclosure and ball joint to the mount adapter.
Qty two (2) M3x12 flat head screws for attaching camera arm to the mounting base.
Optional: Qty one (1) ¼-20 ½" to 5/8" length bolt.