CR1620 to CR2032 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small simple adapter to make a CR1620 fit storage suited for CR2032.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model spawned from me looking for a weather resistant storage case for both CR1620 and CR2032. After some searching that ended up with nothing I designed a small and fast-to-print adapter for the CR1620 so I could use one of the many existing CR2032 storage containers instead.
Features a small cutout so the CR1620 is easier to remove.
Does not require supports and strength seems fine at 20% infil but I always print them solid/100% infil and still only use 0.72g filament according to OrcaSlicer.
Print time with one single adapter should be well under 10 minutes, depending on settings of course.
Print time for 4 adapters with my PETG settings: ~17 minutes.
Made in OrcaSlicer 2.2.0 with a simple cylinder and some negative parts.