AW11 Intake Hoses MK1B. 4AGE MR2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Intake hoses for a MK1B AW11 MR2. These are still work in progress.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the engine bay intake hoses for the MK1B AW11 MR2 NA. I am currently successfully using the throttle body hose with no issues out of TPU(1600 miles) sub freezing temps and over 95 degree summer days with hard driving.
I also have a phenolic gasket, so the intake does not get hot, although I'm sure the TPU can handle it. I also moved the vacuum port location on this hose a bit to better suit my custom idle up valve solution.
The corrugated hose is still being tested, this is a pretty hard print, I am trying PETG for this, although a TPU would work if there is an easy way to support it. The seal should be a pretty good fit. The PRE afm pipe probably needs more angle work. I am still working on these.