AW11 Intake Hoses MK1B. 4AGE MR2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intake hoses for a MK1B AW11 MR2. These are still work in progress.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the engine bay intake hoses for the MK1B AW11 MR2 NA. I am currently successfully using the throttle body hose with no issues out of TPU(1600 miles) sub freezing temps and over 95 degree summer days with hard driving.
I also have a phenolic gasket, so the intake does not get hot, although I'm sure the TPU can handle it. I also moved the vacuum port location on this hose a bit to better suit my custom idle up valve solution.
The corrugated hose is still being tested, this is a pretty hard print, I am trying PETG for this, although a TPU would work if there is an easy way to support it. The seal should be a pretty good fit. The PRE afm pipe probably needs more angle work. I am still working on these.