158 models
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
I was struggling to fdm print the final top section for my MR20 remote (2020 model TV) so I remixed the original model with an extra extrusion to make 1 stem thicker. It may have only been a me problem, but here it is just in case anybody…
Maqueta del Aston Martin de F1 2024
I made this insert to secure the corners of my wiper cowl since the original mounting was broken and it was causing wind to get under my cowl and cause it to rattle. The cap just press fits on top the insert to prevent water from getting…
It is better to print it with 0.25 nozzle and 100% infill, with supports on build plate only, PLA or PETG. With 0.4 it can require some post processing. When disassemble your TV remote use plastic tools and be gentle.
DESCRIPTION: I made this to be as accurate of a replacement for the original window vents as possible maintaining both the aesthetic and functionality while ensuring it had 3D printability. The original vents are designed with rubber…
Using a old belt I had (see link below for one like it) I replaced the stock hard plastic handle and made covers for the top and bottom opening. Recommend printing in a filament that is UV resistant and Heat resistant. Best way for my…
Pour accrocher un routeur WiFi Synology MR2200ac au mur. La ventilation par le bas et le passage des câbles restent assurés. Des ergots empêchent le routeur de basculer. Ces ergots permettent d'accrocher le MR2200ac au plafond s'il est…
This is intended for: Toyota MR2 ZZW30 (mk3 , w30, etc.) MR2 Roadster (Europe) MR2 Spyder (USA) MRS (Japan) My shifter had a lot of wiggle sideways, the "ball" of the shifter rod has a lot of room between the frame and the ball itself,…
This is a bracket that sandwiches between your steering wheel hub and quick release hub/steering wheel to remount your cruise control stalk. This was designed with a Works Bell Rapfix Short Hub (520S) so I can only guarantee fitment for…
This bolt was primarily an exercise on how well (and quickly) I could design a threaded bolt in Sketchup Free (web app version) without any plugins. I've got it down to about 5 or 10 minutes. I also have a 2003 Spyder, so I made it the…
Print with the front of the tooth down on the plate. I just printed these in PLA and they have held up great.
A shelf just big enough for a Synology mesh router, model MR2200ac, from which the router can't be removed unless the shelf is first removed from the wall. This ensures that the router can't fall off. Here's how it's done: Print the…
A plug must be removed from the bumper to fit perfectly. Cut a hole on the wheel arch and screw the other part on with the cap. Designed for 60mm wide pipes.
If you want to fill up your oil without having to awkwardly hold a regular funnel or risk spilling oil everywhere, then this is a must have item. This funnel sits snugly in the filling port of your 1ZZ-FE engine while not interfering with…
This is printed in two pieces with a clever method for keeping everything in place and well-shaded from the sun. You open the dash cubby lid, and the upper part of the phone holder snaps securely into the top latch. The bottom of the…
Left and right grille replacement pieces fit on each side of your rear license plate if you have lost or broken yours. Both include hole for tow hook. (I bought my Spyder used, with some pretty clever carpet square placement, but I've…
Ashtrays on SW20s break all the time so here is a replacement. It retains all functionality and space of the original ashtray including the spring that keeps the lid sprung closed. I have full single-piece lid files but I recommend…
Toyota MR2 Spyder HVAC knob (This may fit other Toyotas of the same gen, not sure). There is a indication hole, and will work fine as is or can put a small diffusing tape over the back.
black cap in photo is the original, white is the printed. It is my first time designing something so it may not be prefect but it works
Beautiful silhouette of the Aston Martin formula. Suitable, for example, for hanging or just displaying. I also recommend it as a gift for formula, car and other lovers. Beautiful print! You can scale as you like, but don't scale all axes…
I disassembled the controller based on this video, be careful about the latches: Then printed by a resin printer (ABS-like material) with 0.05 layer, used supports and 35° tilt.
I would recommend scaling it up by 1% or 2% if it isn't fitting correctly. Category: Automotive
Mich hat immer gestört, dass ich die Hörmann Fernbedienung HSE 4 BiSecure für unser Garagentor in unserem Toyota MR2 W3 im Handschuhfach suchen musste… Inspiriert von einem bei Printables gefundenen Cover für diese Fernbedienung habe ich…
You may have to split the part in the middle in your slicer, depending on your printer. This will not fit all fire extinguisher brackets, so you may need to change the hole location depending on your bracket.
Switch shroud for SW20 MR2 instead of the ash tray. you have to tap the the back holes where the ash tray was mounted.
Ever thought that the center storage bin on the dash of an MR2 Spyder would be a perfect place to mount a phone? Now you can with this simple accessory that clips between the storage door latch and receiver. Height adjustable for…
Intro Update 01/09/2024: Tested new 5º degree tilt, removes almost all reflections that comes thru rear windscreen. Update 31/08/2024: When testing I see some reflections due screen angle, need to test a new version with corrected screen…
This is a three-part battery hold-down. When I bought my used Spyder, the battery was missing the hold-down bracket, so I designed this strong bracket with a customizable emblem socket. The three printed pieces slide together without…
Needed a tool to remove the vent grill without disassemble the whole dashboard. Puller it's not needed as long you pull from the grill with the method from your convenience. Printing Instructions 0.1mm layer height recomended Use PETG,…
I hate to drill into my car for something as ugly as a license plate. I also hate getting pulled over for not having front plates. I tried mounting my plates inside the front grille, but the A/C (believe it or not) performs really badly…
If you've downloaded the MR2 Spyder Pull Strap Covers, but only using the upper cover for a loop style pull strap and want to cover the bottom hole completely.
Intro I tried Shadcast's part but had trouble with the screws. So, I designed from scratch mimicking Alex Wilhelm's design where the rubber bumpers fit in the OEM location and use the 12mm boss screw-holes from the original rain guard. v2…
For proper use, print with a material with high thermal resistance. ASA, ABS, PETG, etc. For the SW20, please look at my other models. The size/orientation is a little bit different. This clip was printed so that the prop rod was oriented…
Simple clip to replace the factory on that retains the prop rod into the side of the car. This should work for both supercharged and NA variants of the MR2, I put a slot into this so you can slide it over the factory rod where they…
I designed this part as a replacement for the broken wheel shaft of my LG MR22 GN remote control. I printed both vertically and horizontally. The horizontal position seems to be more stable. Tried it in PLA and it seems to be strong enough.
These eccentrics can be mounted instead of the original parts and they can fix leaking seals on targa tops. They were designed for a Toyota Mr2 w20 built in 1992, but should be compatible in the complete series.
The SW20 MR2 (1990-1999) front door has three mounting holes for the lower speaker. The holes are evenly spaced on a ~155mm circle. This adapter ring fits most 5.25" speakers that attach with 4 screws. Required hardware: 4x M4 x 12mm…
I augmented Mitynerp's original model to have the cupholder a few centimeters towards the left which was more comfortable for me. The model with the cup toward the right is just a mirror image of my LH design. Recommend printing with…
Simple, but effective wind deflectors for the MR2 Spyder. These wind deflectors redirect turbulent airflow when the windows and top are down. They simply attach between the hard plastic A pillar and rubber window seals. No print supports…
I modified this model so it has a debossed logo to make it easier to print.
Aston Martin AMR26 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
This is an extended kick panel fuse cover for a '91-'99 Toyota MR2. This cover provides enough space to use a fuse tap on one of the kick panel fuses. I did this for wiring my AiM digital dash and tapping into the 12V power via the…
Are your sun visor mounts in your MR2 (SW20) cracked from UV exposure? Print these! Use a high-temp material such as ASA/ABS, or Nylon. Print with solid infill, 4 perimeters. If you can, use a carbon or glass fiber filled filament, these…
As a proud MR2 owner, it seemed appropriate to work on my symmetry skills in sketchup with a deep-walled coaster. At 100mm diameter, It can hold large cups and retain plenty of condensation in the summer. Printing in PETG allows it a…
Like many SW20 MR2 owners, as I stripped my car down for restoration, the fog lamp screws were seized in place. Removing the lights meant a couple of the mounting tabs on the lights where damaged. Rather than attempting to repair the…
Replacement 3d printed cap for a Toyota MR2 Roadster/Spyder, using the original bolt. The spare wheel clamp on my Spyder had rusted in place, and I needed to split the original Toyota cap (with a chisel) to get access to the bolt head to…
Funda/carcasa mando a distancia TV LG Magic Pointer Remote en TPU model LG MR25GA Impreso en TPU Case/cover for Magic Pointer TV Remote in TPU LG MR25GA https://www.lg.com/es/accesorios/tvs/mandos-a-distancia/mr25ga/
This is a clip for the engine lid of the Toyota MR2 SW-20. The original clip breaks easily so I made this replacement. I printed it on it's side with support material. The circular opening should be facing sideways while printing. I…
I whipped up this quick tool in CAD based on measurements of a replacement ignition cylinder lock to help with re-installation of the ignition-lock cam actuator. This makes replacement of the lock cylinder a lot easier and allows you to…
Wallart of the new Aston Martin F1 Car for the Season 2024 AMR24.
Replaces the ashtray with a cupholder on the passengers side. The cupholder and insert are made with an OD of 77mm and is 1mm thick. I tried adding a holder on both sides, but knees exist.
Ball Style shift knob for toyota mr2 spyder.
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
Sliced from Fusion360 to Prusa Mini directly, works well in PLA with default settings.
The middle part which connects to the visor can be removed, the two screws fixes it in place nicely. Category: Automotive
Simple holder for my 3.5mm jack adapter for minelab xterra pro
Lost your rear strut cap in an AW11 / MK1 MR2? Feel like your shock nuts look ugly? Scared of water pooling in the terribly well designed strut mount and rusting your shock nuts? Print a pair of these and be good to go! Designed for OEM…
I created a side cover for the ZMR250. It was a tight fit, but works well! There is a small gap between the side cover and the top frame near the FPV camera because of the piece holding the camera. Not much I can do about it. This won't…
You can pressure fit this in the cassette storage rack and attach any universal cupholder to it via screws. I used a cupholder from a S210 from the third row seats.
I have often wondered why these senseless ZMR250 landig gear carbon parts are produced . They fall anyway from the first landing . So I designed a little stylish keychain where you can use the ZMR250 landig gear with. Have fun with it!…
Caddy to restrain battery from moving, including antenna and power connector mounts to be screwed on top of the topplate of the ZMR250 frame. Battery mount has been originally designed for the ZIPPY Flightmax 1800mAh, and includes cutout…
These are the engine bay intake hoses for the MK1B AW11 MR2 NA. I am currently successfully using the throttle body hose with no issues out of TPU(1600 miles) sub freezing temps and over 95 degree summer days with hard driving. I also…
Delete brackets to attach the rubber stops after the rainguard has been removed from the engine lid. Use whatever screws you have laying around. This was printed in PETG and has lasted with engine bay temps.
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
This is a 3d model of the MR2 SW20. This body is for the LDRC 1802 (Mazda RX7) models. The headlights have been cut out for the pop-up's in the car already. Feel free to remix if you want. *This body has the grill cut out for the radiator…
Skids for the ZMR250 frame including double motor protection. Just like user Judar (from the source file) I had problems with the moist ground and getting mud in my motors. The side panels will protect your motors from dirt and also…
ZMR250 low-profile frame with GoPro mount. FPV Configuration: Platform: ZMR250 FC: Mateksys F722-SE ESC: Racerstar RS20Ax4 Motors: Emax RS2205 RX: Flysky FS-iA6B Video TX: Eachine VTX03 Camera: Eachine Wizard X220 Battery: Tattu LiPo…
Simple printed replacements for the factory parts.
This is a single piece, use supports.
I made this to replace the dimmer wheel on the aw11. Fit is meant to be very tight, factory wheel has a metal insert for fitment, this is just all solid plastic. Print in a stiff and heat/uv resistant material. ASA will likely be fine.…
I'm not sure if JR's cap was intended for the armrest but it did not fit my current hardware. I modified his cap to fit the screw pictured. I also recreated a sleeve that goes into the armrest. My car only had one armrest cap/sleeve combo…
Mitsubishi Delica L400\L400\Space Gear - front door locking pull clip (OEM: MR230269\67395D) More durable\thicker model - to prevent future broking. All dimensions\curves\hights reproduced from original broken part. Should fit on both…
Fairly simple battery hold down for the first gen MR2 AW11. This was made to fit the standard 24F group size battery, I believe this is what is stock on these cars. I recommend printing this out of a pretty robust material. I made mine…
Supra-AE86-MR2 head light motor knob please print in ASA or ABS
Replacement rubber isolator for the sunroof sun shade on a AW11 Toyota MR2. The originals like to fall off and go missing. May fit other Toyota models that have a removable sun shade. Print in a softer TPU.
I made these to attach a custom rain shield to my TCS Motorsports strut brace. I assume these should work on any TRD rep/style strut tower brace. Print out of high-temp resistant material such as ASA/ABS, Polycarbonate, or Nylon. I…
Print in TPU, I recommend at least 4 walls and 4/5 top/bottom layers depending on your layer height. These are printed at 60% grid infill and have been holding up for almost 3 years now
This is a model of a 1991 Toyota MR2. It is printed in 3 parts I printed it on an Elegoo Neptune 4 plus. The three sections roughly measure 320 mm from end to end there is enough tolerance in the tabs that they should be able to be scaled…
Mold set for creating new rubber bushings for AW11 rear visor bolts. Included is a mandrel and two versions of a die.
Radio bezel clip replacement for the MK1A MR2. Print with supports and max infill. Replacement clips will require a little bit of trimming depending on the state of the original clip arms. Should fit in very snug, may require epoxy if you…
I purchased the aftermarket cruise control from Monkeywrench Racing for my 2003 Toyota MR2 Spyder. This has been a very good unit so far (6 months) and a very welcome addition to this old car, BUT the battery-powered wireless control…
A good looking string art of the beautiful Toyota MR2 :)Scale it large for your garage wall, or small for the wall space at your desk <3 SHOW ME THOSE MAKES after you "install" it ;)
Toyota MR2 Spyder/Roadster MK3 MR-S Scan files, one rear side, engine bay with engine on, rear with ductail, and rear JDL bumper with tail lights on. trunk too Category: Automotive
Motor tool for the Holybro Shuriken 250 racing quad. Print instructions Tight fit, maybe a little sanding required.
Found my glove box button broken off and laying on my passenger floor one day so I made a replacement. Intended for 1986 and earlier Toyota MR2 AW11 that does not have a key tumbler to lock the glove box. Only replaces the original…
This armrest design clips right into the location of your old one without any modification. STL files are included for convenience, but you should use the STEP files for you print!! There are two variants: A slick, basic armrest A…
Two custom made trays for the MinimOSD and video transmitter modules like the ET200, LT200 and similar sizes. The trays can be shoved between the four back pillars of the ZMR250 frame. Vertical support was not needed in my case since…
A 25º angled mount for installing a mobius camera on a ZMR 250 Quadcopter Multirotor frame. No vibration damping, my testing shows it's really not needed. Mounts to the screw holes from the from 4 poles, weight is 8g in PLA. Print…
You may want to scale this to around 103% or so depending on settings etc, mess around with it. Also note that the clips on the back are not perfect, this part is usually pushed in and then affixed with some epoxy or glue on the car from…
I purchased a pair of Pyle PLMR24 speakers from Amazon a little over a year ago. Despite the blatant lies in the description - see my review for those here - the speakers sounded pretty good in my old pickup truck. Unfortunately, one of…
New lid for the fusebox in the enginebay on a Toyota MR2 mk1 - AW11. Print two of the clips. I have not made locator pins, as I glued them on with the lid on the fusebox. My lid is printed in ASA, on an old Ender 3, about 4 years ago. So…
this is a clip for the JDM MR2 to hold the bottom of the rear USA Style license plate. Made for a 92 JDM import so it should fit any JDM SW20 MR2 that need a USA size plate
Thought id share this simple mod, use your old lense and purchase this two items: https://www.aliexpress.com/item/1005003162062596.html https://www.aliexpress.com/item/32593154120.html
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the heig ht. Design Concept This art piece features a stylized…
