MR2 (SW20) Sun Visor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement sun visor mounts for a SW20 MR2.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 54
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Are your sun visor mounts in your MR2 (SW20) cracked from UV exposure? Print these!
Use a high-temp material such as ASA/ABS, or Nylon. Print with solid infill, 4 perimeters. If you can, use a carbon or glass fiber filled filament, these remain under spring tension and extra stress is put on these when you use your sun visors to hold up a sunshade.
To install, disassemble your old mounts, taking note of the components and where they go. You can use a flat head screw driver and a mallet to gently tap the end caps off, which will allow complete disassembly. Use the old hardware and your new printed mount to assemble your refreshed sun visor.