Another CNC dust collector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another CNC dust collector with a 32mm outlet to keep the workpiece and room clean of dust.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This dust collector is designed to keep your workspace and workpiece clean.
The design consists of two parts:
- Shoe Holder: Bolted to the DC motor using M4 screws, with a 32mm outlet for easy hose attachment.
- Shoe: Secured to the holder with 4 strong round magnets (10x3mm), allowing for easy removal and cleaning.
A TPU curtain minimizes dust and debris escape. Note that some post-processing may be needed, as the spacing between parts is 0.3mm. The curtain is attached to the shoe with a small screw through the TPU for a secure fit.
This is my first major design in OpenSCAD, and I’ve made it fully parametric! Files are included—just keep in mind this is a work in progress, so don’t expect perfection.
Please leave a comment if you made it and/or if there is an issue! It would make my day :)