Liczymy pasujące modele…
I bought a cheap 6 HU 19" Rack Enclosure for Networkequipment that came without the brush dustcovers to help guide the cables through the top or bottom. I created this dustcover which can be printed on a >= 300mmx300mm printbed and can…
Lexus headlamp dustcover FOR LEXUS LX300. LX450, LX470, LX570, LX600 (CHECK ONLY ON LX470) WITHOUT HOLES FOR WIRES Пылезащитная крышка для фар Lexus. БЕЗ ОТВЕРСТИЙ ПОД ПРОВОДА REMIXES ARE WELCOME!
For some of my euroboxes, I wanted to close up the holes left for the hands so that I can store them outside-ish without insects crawling into them. These fillers fit into “Eurobox NextGen Economy” made by ab-in-die-box.de. Printed in DAS…
I designed this dustcover for my NAS, it also serves as a protection for the powerbutton to prevent accidental operation, There is holes so the LED is still visible. Printed with Bambulabs PLA at 0.2mm and 15% infill. Not much more to it…
FilamentRacks are nice but storing the spools in bags always felt a bit wonky. I was searching for some kind of case to store my filament spools but everything i found was either overengineered or was meant to print out of it, i just…
Slim dustcover for garmin smartwatches. Works great and snaps in place nicely, yet is easy to remove when needed. Printed in TPU.
This is my first published print so please be gentle. I combined the designs from https://www.prusaprinters.org/prints/70829-prusa-mini-z-axis-dust-cover and https://www.prusaprinters.org/prints/30855-prusa-mini-z-motor-cable-protection…
Loose-fitting dust cover for your consolized Anbernic RG35XX H. Enlarged, loose-fitted version of "Simple Cover for Anbernic RG35XX H by amd" with an open backside and vents along the edges.
This model has been depreciated: see https://www.printables.com/model/1288871-dustcover-hinge-for-thorens-turntables-new-version for the updated version. ----- A redesigned hinge for Thorens turntables models TD160, TD165, and TD166 Mk II…
Enhance your Profitec Pro 300 with this custom water tank cover, modelled to efficiently vent steam and humidity to the back of your machine while keeping dust out. It also creates additional storage space on top of the unit for a…
Option A Print 2 x half covers and the belt. glue it together. or use soldering iron to melt it together using filament - with or without belt. Option B Print the EXQUIS - FullCover.stl on a larger printer than mine. Modeled over a 3D…
A simple, fast printing, TPU dustcover for Colt 1911 .45 ACP magazines. I have not printed this in other than TPU so adjustment may be necessary in other filaments. A new Colt magazine was used for design. It will likely fit clones,…
Hinges for Thorens turntable dustcovers, for models TD145, TD160, TD165, and TD166 Mk II, with a number of improvements and a similar look and feel to the original. Prints well in both PLA and PETG. Stronger hinge pins, correct alignment…
Created this cover for my printbed so it stays clean during production pauses or for longer breaks, where visitors might touch the plate. Just home the printer, slide the cover on, finished! So easy :) Its printable on the Bambulab A1,…
Created this cover for my X-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) Its printable on the Bambulab A1,…
Created this cover for my Y-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) The covers are formed to slot in…
Created this cover for my Z-Axis so it stays clean during production pauses or for longer breaks, where visitors might touch the printer. Just home the printer, slide the covers on, finished! So easy :) The clips on top are needed, so the…
My wife wanted a protective cover for her Lashify Lash Pad (round silicone pad 80mm) Meine Frau hat sich eine Schutzhülle für Ihr Lashify Lash Pad gewünscht (Rundes Silikonkissen 80mm) Printed in PLA, supports on (because of the thread)
Abdeckung für den SUNLU SP2 Filamenttrocker- Heizeinheit, um das eindringen von Staub zu unterbinden.
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
I am way to cheap to buy decksavers for my gear, and I own a 3D printer. I could not find a dust cover for the ESI xjam pad controller, so I made one myself.
I bought a cheap 6 HU 19" Rack Enclosure for Networkequipment that came without the brush dustcovers to help guide the cables through the top or bottom. I created this dustcover which can be printed on a >= 300mmx300mm printbed and can…
I converted my Mercedes V-Class to an camper van. The Rear Seat locks are nut used and dust can going into it. I made this cover to close the locks. 2 little openings are on both end, so you can use an tool to remove them if needed
Cover which easily plugs into a C13 or C14 socket to keep them free from dust.
If you need other dimensions you can scale the model or feel free to leave a commment.
This is a cap/dustcover for the Flex Shaft adaptor that works with the Ryobi 12V rotary tool (#TMV01). It will also work with Dremel flex shaft adaptors, as the collars are pretty standardized. The Flex Shaft tool is a handy addition to…
Small prints to avoid getting sawdust oder dust in the controller of your maschine.
I ordered the Corsair Carbide 200R Case unknowing that there are no Dustcovers included for the Fan or radiator openings. The Top Covers are just plugged in the existing mounting holes for the fans. the sidepanales are screwed in with the…
A modification of the Dustcover for the Mister Multisystem MMS 2022. i2c2oled-project: https://github.com/venice1200/MiSTer_i2c2oled Wireing to RTC1.3: https://misterfpga.org/viewtopic.php?p=26036#p26036 Oled-Link:…
A modification of the Cart Dustcover for the Mister Multisystem MMS 2022. i2c2oled-project: https://github.com/venice1200/MiSTer_i2c2oled Wireing to RTC1.3: https://misterfpga.org/viewtopic.php?p=26036#p26036 Oled-Link:…
I needed a Dustcover for the Neutrik NAUSB-W on my CNC Machine, so i quickly built it parametrized with FreeCad. I've printed it on my MK3s with PETG with the 0.2 speed profile on a 0.4 nozzle and it fits perfect. If you need other sizes,…
I simple create a Dustcover to protect the camera sensor on 2BitBoys Camera+ Mod for GameBoy Camera. https://2bittoy.carrd.co/
This is a Remix of the design by er2kien uploaded on thingiverse. The original design didn't fit well on my Voopoo DragX. I printed with supports. Note! Please have a look what filament you use and adjust the scale. With this filaments I…
It's called a dustcover, but I made it to keep my fingers off of the board while I'm using the knob. Print solid with the top down. It does not go all the way to the top-outside edges to allow for the screws. The island in the middle…
Second version of my simple Dustcover to protect the camera sensor on 2BitBoys Camera+ Mod for GameBoy Camera. This Cover is compatible to the botton Lens Sleeve Cap from HERE . https://2bittoy.carrd.co/
This is a dustcover for the battery mounting plate for the Pendix eDrive e-bike system. Print instructions In the 3mf files for both PLA and PETG I added modifiers for the following. 1) first 2mm is printed with 100% infill because this…
Dustcover MK4 / MK4S for Z-axis with hole for additional cover.
A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…
Dust protection for jack sockets with a diameter of ¼" Inch (for guitar amplifiers etc.) for unused inputs. _________________________________________________ Staubschutz für Klinkenbuchsen mit einem Durchmesser von 6,5mm (für…
This is a simple cardboard dust cover design for the Rotrics DexArm. It can be cut out with a knife, scissors, lasercutter etc. You need 926mm by 556mm of cardboard. It is designed for 4mm thick cardboard - but the shipping card board box…
This is the upper part hinge, to replace the acrylic tabs when they break on Technics SL-3300 turntable. Might fit other Technics turntables with tabs molded into the dustcover. Please post in the comments if you used this on another…
Those are two magnetic dustcovers for the Holzmann TKS250 tablesaw. The dust emission from the front ist one of the main flaws of this saw. There are some solutions out there. But most of them are very complex. Mounted via magnets 8x3mm.…
Modelled based on a picture not measurements, stays in place when riding. Print in tpu or PP
320mm x 320mm minimum bed required Printed with Prusament PETG; Lipstick Red Urban Grey Signal White Ultramarine Blue Jet Black
Dustcover for GRX 810 left+right print with TPU With M4 thread for removal
![Dustcover Hinge for Thorens Turntables [New Version]](https://media.printables.com/media/prints/d8deb748-421e-460d-90ef-f3488e6d455c/images/9702157_c18b3f7a-7586-4100-ba66-bae22906b9ac_6ce68b7a-c3f8-45a9-bd5e-87b14a0266a3/new_thorens_hinge_2025-may-07_02-38-16pm-000_customizedview2241933857-1.png)
