Simple Cardboard DexArm Dustcover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple cardboard dust cover design for the Rotrics DexArm. It can be cut out with a knife, scissors,…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a simple cardboard dust cover design for the Rotrics DexArm. It can be cut out with a knife, scissors, lasercutter etc. You need 926mm by 556mm of cardboard. It is designed for 4mm thick cardboard - but the shipping card board box of the DexArm should work as well, as you only need the height of 556mm at one location.
Before folding it and combining it with hot glue I suggest you to dent the cardboard along the folding edges with a ruler or something similar.
Be advised to not ignore the small 4mm gabs near the flaps, the bends need their space and otherwise the box might not become rectangular after gluing.
Category: Robotics