Quest 3 Attachment for Ikea SKÅDIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to attach a Meta Quest 3 to a SKÅDIS pegboard using SKÅDIS hooks.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 536
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of this lens cover that allows it to be mounted to an Ikea Skadis pegboard using these hooks.
My previous attempt used 3D printed hooks, which can break under, this version is much stronger.
The dovetail version doesn't require any glue, and can be seperated later. If you want to glue then the planar version should work. I've also included a version with no cut, and the STL.
I printed with supports on the larger top part, you may need to lightly sand to make the dovetail easy to assemble or disassemble.
I used 15% infill, with supports on build plate onlywith 0.2mm on a Prusa Mini.
I also put my lens cleaning cloth over it to further protect the lenses.