RC Combat Streamer Roller Reel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes quick work of rolling up streamers/ribbons for RC Combat. Operate manually or with a drill. Three sizes available.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Prints with no supports. You will need a M3x10 or M3x14 screw to attach the handle. Leave it a little loose and the handle will spin. Glue the Drill Post in the center of the reel if you want to use a drill to speed up the winding process. Three sizes available that fit 1", 1 ¾" and 2" party streamers or ribbons.
Easy to operate. Slide the end of the streamer into the slot in the hub of the reel and put a few wraps on it. Then place the reel in the housing with streamer going through slot in housing. Reel in the streamer manually with handle, or put a drill on the center post and make quick work of it. When done take the reel out of the housing and slide the streamer off the hub.
Works great for rolling up ribbons as well.