The Hand Of Iguanodon (Stand)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sand for displaying my 'The Hand Of Iguanodon' model.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit the printed version of my ‘The Hand Of Iguanodon’ model ( https://www.printables.com/model/982092-the-hand-of-iguanodon ). The pose was chosen by me by examining a number of reference mounts found online, and by attempting to orient the specific bones from the print in such a way that they felt biomechanically accurate.
The footprint of the stand is approx. 48x55cm of space when printed at full scale.
The fit is fairly snug - so depending on your printers tolerances some of the bones may take some ‘convining’ to get into the proper slots. I spent a while sanding and filing after-the-fact to get things to fit right, and added magnets to a couple of the bones to help them stay in exactly the right places. I wanted the bones to remain removable (because I think they're cool to look at individually), but if you wanted to save some trouble you could just glue the printed bones in place for a more permanent display.
The ‘columns’ for the stand are not included, as instead of printing them I simply used wooden dowels cut to length and painted black. This was a lot easier, faster, and cheaper than printing the columns.
(Note: I realize now I missed the opportunity name it ‘The Stand Of Iguanodon’)
Column lengths are listed below. These are approximate, taken from the original model - not essential these are mm-precise since there's some wiggle room in the assembly. I recommend dry-fitting them before gluing them in place to make sure everything lines up properly:
1 - 200mm
2 - 299mm
3 - 200mm
4 - 304mm
5 - 321mm
6 - 304mm
7 - 198mm
8 - 182mm
9 - 264mm
10 - 264mm
11 - 30mm (3x)