1 / 5
Universal Spool to Drilling Machine Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
Spool adapter for spools with an inner diameter between 46 and 52mm. Tested for many spools from 250 grams to 2 kg.
Printing Instructions
Both PLA and PETG filaments are fine. Printed using a 0.4mm nozzle and 0.2 layer height. 20 or 25% infill. I recommend to place the Inner item with the nut hole down and turn support from build plate on.
Other parts required
- 3 x M10 nuts
- 1 x M10 threaded rod 16cm or longer
- 1 x 20mm washer with a 10.x mm hole