1 / 1
Onewheel XR footpads with Flight Fins mounts outside — zdjęcie 1

Onewheel XR footpads with Flight Fins mounts outside

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reuse your flight fins on your Onewheel XR (or LencoWheel V6&>). The footpads integrates mounts for FF on the outside.

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
472
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This enables you to reuse your flight fins but mount them on the outside. I found that they still allow you to run-out a nosedive and only make jumping off slightly more inconvenient but you be the judge.

I printed these in TPU with 3 walls and 18 % infill so it also dampens drops a bit. You might need a special glue to stick your grip-tape to TPU. I used double sided tape to stick the pads to the bottoms. The bottoms I had laser-cut from 2 mm alu. sheet. I print this stuff no faster then 50mm/s and that works for me. It was designed to fit metric M5 heated inserts but you can change this off course. I might try to cast them later on and cast them straight on the bottom part to really bond the two together. There is still 4 bolts holding these two parts together in any case.

Warning! I ended up printing the back side mirrored because I decided I wanted that, pretty last minute. So can you off course, just be mindful. You can also mirror the front if you ride with the right leg in front.

If you can't make the alu parts send me a message using my site or order there once I create the items in my store.

https://lencosolutions.nl/

I uploaded the STEP files so you can all have fun changing the angles and stuff if you want. It would be pretty cool to see what you can come up with. Free to use and change, just mention me and don't sell them. Last but not least, enjoy!

Tagi