Wyniki wyszukiwania: vesc

effervescent tablets holder

holder for storing tubes for effervescent tablets. Can be connected in calusters

Effervescent Tube Stand

Stand that holds up to nine (29 mm diameter) tubes of effervescent tablets. Models for 4, 6 and 9 tubes are included. A small testprint is included so you can check if the printer tolerances will allow for the tube to fit. The diameter of…

Adjustable VESC Onewheel Stand

Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more. The “foot” of the stand attaches to the “base” of the stand using: Four M5x20, M5x25, or M5x30 countersunk screws M5 heat set…

Brausetabletten-Halter - effervescent tablet tubes holder

holds three standard effervescent tablet tubes

VESC mounts for Lenco front box

If you want to use your Lenco front box with something other then a Spintend UBOX 250A (no mods needed for that), you can print these brackets to fit either a Spintend 100V 100A or an Enoid MK8 (not the pro). This also makes room to fit a…

Gridfinity 1x1 for support base for box of water-soluble tablets (such as vitamins/Effervescent)

About: Gridfinity 1x1 support base for box of water-soluble tablets (such as Effervescent). Additionally those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base…

Raiden 7 Vesc ZESC

Step file provided by ZESC for Raiden 7 for checking fitment and getting measurments

LFoc Little Foccer VESC Model

LFOC model for checking fitment and getting measurements

effervescent tablets holder/ Brausetabletten Halter

A selfmade holder for effervescent tablets. Holds 6 pieces. Ein selbstgemachter Halter für Brausetabletten. Hält 6 Röhren. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 160 Infill: 10 Filament:…

20s2p p45b battery (One wheel GTVESC)

Onewheel battery model 20s2p

Ubox 85v 150a Single VESC Casing

Model provided to me by Spintend - Includes both the Vertical Phase Wires and Parallel Phase Wires configurations of the Ubox 85v single VESC controller. Controller heights match the specifications from their website. Thank you, Amy!

Onewheel XR vesc Status LED bar

Based on this instructables artical. Works with stock wood footpad https://www.instructables.com/Adding-Status-Lights-to-the-XRV-Kit-With-the-Fungi/

3dp PubBox V1 (and others) XR Vesc Box Unified Cable Cover

Single-piece cable cover for 3dp PubBox V1 and other PubBox-style 3d printed VESC controller boxes. Printing Instructions Print as it lies, with supports 50% or higher infill Organic supports enabled

effervescent tablets holder

holder for storing tubes for effervescent tablets. Can be connected in calusters

Onewheel vesc Magnet Big Fender for Big tires

Onewheel vesc Magnet Big Fender for Big tires I created this Fender to help those who have large tires, it fits all rail models because the fenders are divided into 4 pairs and the two in the middle are movable so they will be held by…

THOR-400 Fungineers Vesc

Official Thor400 VESC controller model assembled. Model is not owned by me.

Effervescent Tube Stand

Stand that holds up to nine (29 mm diameter) tubes of effervescent tablets. Models for 4, 6 and 9 tubes are included. A small testprint is included so you can check if the printer tolerances will allow for the tube to fit. The diameter of…

VESC 100V 250A

This is a mount for the vesc controller https://cad.onshape.com/documents/d5ca45786ce166b6a65e9056/w/74cd2b6ca612b579a78

VESCExpress Blutooth Cover

Protective Cover for Ava Spark VESCExpress Blutooth module. Used with Onewheel and other motor controllers. I left some space for hot glue to secure it inside. STEP included.

Storage for 16 vitamin effervescent tablets, with handle

EN: This is a custom bracket/tray with a handle designed to hold your effervescent tablet tubes for vitamins, magnesium, electrolytes, etc... I got annoyed that all the effervescent tablet tubes always fall over when you try to find or…

Garmin Livescope Turret Pointer

I made a DIY turret for my livescope setup. I needed a point for the top to indicate which way the beam was directed. Fits an m6 bolt thru the base after I tapped it. I printed in ASA. It has two pieces so you can print it in contrasting…

Magnetic Charge parts for XR Vesc platforms

Having a magnetically attached charge port for your XR based VESC isn’t a requirement by any means, but it is a quality of life improvement that is amazing. This is meant to be able to replace the standard XLR charge port. It is not…

Air Scoops V2.1 for Onewheel/Vesc's

Mass isn't everything when it comes to managing heat. You also have to have a way to remove the heat from the heatsink. These V2.1 version of my air tunnels do that. What's different between V2.1 and the originals? These work better at…

ENNOID Mk8 or Mk8 Pro VESC Controller to Thor300 Sheet Plate Mount

This listing includes: ENNOID MK8 VESC Controller to Thor300 sheet plate mount. ENNOID MK8 Pro VESC Controller to Thor300 plate mount for the CNC PubBox. For the MK8 Pro mounting plate, I've included a split design for cheaper, 2d…

Cuda Vesc upgrade

Hit me up for firmware updates and I'll help out

Adjustable VESC Onewheel Stand

Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more. The “foot” of the stand attaches to the “base” of the stand using: Four M5x20, M5x25, or M5x30 countersunk screws M5 heat set…

Effervescent Tablet Tube Holder

Effervescent tablet holder that fits the standard 29mm diameter tubes. The optional TPU base should just seat into the slot and hold well without glue, although the fitment quality can vary depending on your printer and slicer setup, so I…

Hall Sensor Trigger Throttle Remote (for VESC)

Well, there is a lot to say! But he’s the short version first: I designed this device as a throttle for my DIY electronic Kettcar. I called it a remote, but it is actually connected to the motor controller with a four wire cable. These…

VESC Sensor Shapes

VESC sensor shapes for modeling reference. Provided to me by StokedStock and others.

Türveschluss

Einfacher Überwurf zum Verriegeln der Tür

Electric Mountainboard Motor and Vesc Mount

I am building an electric mountainboard and since I bought a used and unbranded board I had to make all the necessary parts by myself. I made my 10S5P battery already so now is the time to mount the motor and connect it to the vesc.…

CNC PubBox V3.0 for VESC XR/Funwheel

Thanks to Auden Huffman for designing the original PubBox! It's been a great foundation for future designs. This XR-form-factor controller box provides numerous controller mounts and plenty of room for activities. CNC Pubbox V3.0 brings…

GX16 Universal Charge Port Plug or VESC Onewheel Funwheel

print in tpu with 0.2 height maybe 3 walls (solid, wont matter) random scarf seams on contour and hole 10mm max scarf length (maybe shorter)- scarves improve water resistance no support- designed for bridging finger grab side down tested…

Switchcraft cap short for VESC

I adjusted the thread until it worked fine on my X1C with PETG, if you have a different flow rate it might be off, just use face offset or change flow ratio if its too snug/loose I reused the existing collar and rubber, just cut off 10mm

Effervescent Tablet Organizer

A Effervescent Tablet Organizer for 7 packagings. Hole size: 31mm diameter, 30mm depth. Fits exactly on the bed of an Ender 3 (220*220mm) if rotated diagonally and with build plate adhesion type (e.g. raft, skirt) set to none.

Brausetabletten-Halter - effervescent tablet tubes holder

holds three standard effervescent tablet tubes

Haero Bro VESC enclosure

I based this off of the enclosure made by aleksvan23 https://cults3d.com/en/3d-model/various/haero-bro-vesc-enclosure and modified it for a Stormcore 60D+ with a Radium Heatsink. Changes: resized heatsink hole to fit 135mm X 85mm radium…

VitaDock – Effervescent Tablet Tube Holder | Cabinet Door Organizer | Quick Mount Vitamin Storage

Keep your vitamin tubes organized and always within reach. VitaDock is a compact holder designed for effervescent tablet tubes (Ø ~28 mm). It mounts quickly inside cabinet doors, on walls, or any flat surface using double-sided tape.…

VitaDock-4 – Effervescent Tablet Tube Holder | Cabinet Door Organizer | Large Vitamin Storage Rack

DESCRIPTION Finally a proper parking space for your vitamin tubes. No more drawer chaos. VitaDock-4 is a compact holder designed for four effervescent tablet tubes (Ø ~28 mm) . It mounts quickly inside cabinet doors, on walls, or any flat…

VESC mounts for Lenco front box

If you want to use your Lenco front box with something other then a Spintend UBOX 250A (no mods needed for that), you can print these brackets to fit either a Spintend 100V 100A or an Enoid MK8 (not the pro). This also makes room to fit a…

VESC 75100 Bike Tube Mount

This model is for mounting an "EBike" style VESC 75100 to a bike seat post tube with hose clamps. The mount is designed for a bike tube diameter of 35mm, but this can be modified in the attached Fusion 360 archive file by modifying the…

VESC 75100 Potting Fixture

This model is designed to hold a Flipsky/Makerbase "EBike" style VESC 75100 vertically to allow it to be filled with a potting compound to waterproof it. 2x M3x8+mm screws are used to hold the ESC in place. I used hot glue to seal the…

Ninebot G30 & G2 dashboard cover for VESC

Ninebot G30 and G2 dashboard cover replacement for VESC use. Files included are step files, easily adjusted to your needs. Enjoy.

VESC express + TJA1050 housing

Vesc express is the way forward so I made this slim housing. I used double sides tape to stick the express and TJA in the lower case. Then I soldered the wires. After this you can glue the top surface with some superglue. Print in PETG.

Summit Livescope Pole Holder and Support

This is a print in place holder for a Summit Livescope pole that allows it to rotate 360 degrees and attach to a 1" ram ball mount. It uses a M6 bolt and wingnut to clap the pole in place. There is also a support plate that mounts under…

Raspberry Pi Zero with Waveschare 1.44" Display Case

the base is directly created from bobtideys design . The lid is also from @bobtideys added with parts from the Raspberry Pi Rack mount. needed screws: 2x M3x16mm Category: Office

VESC enclosure

This is a draft for an ESC enclosure with a mount for Trampaboard. /!\ Work in progress, feel free to give feedback You can mount vibration dampener between the base and the back plate. The Down part is design with an M3 thread to mount…

Onewheel VESC Parallel 6amp Diode Case

Onewheel VESC Decal

FFM! VESC your onewheel now and then print this beautiful decal as a badge of victory over Kyle Doinkson.

VESC Enclosures for Electric Longboard

Enclosure for 2 VESCs. Fits Bluetooth module, wires, remote receiver... Printed in Advanced PLA / 50% infill. for the light version. I had also very good results with black TPU 100% infill, it's perfect for a concaved deck, as it will fit…

VESC 6 SIX case enclosure

Enclosure for VESC 6 with strain relief,space for Bluetooth receiver and an arduino nano. Should provide some protection against impacts and water. M4 Screws are used for fixing the cables and closing the lid. A foam gasket could maybe be…

Flipsky 6.6 Plus Duel VESC Enclosure

Flipsky 6.6 Plus Duel Vesc Enclosure This enclosure is for the VESC with space for receiver and bluetooth module down the side. The lid is designed to be push fit and is best stuck down with silicon sealant for waterproofing. Hole on lid…

Effervescent tablet holder

Tabletop holder for 6 tubes of effervescent tablets, just because i kept knocking them over. Print Settings Printer: DIY Rafts: No Supports: No Resolution: 0.3 Infill: 10% Filament: Kaige PLA Gray Category: Organization

Effervescent tablets holder

Effervescent tablets holder. PETG, 0.4 nozzle, 0.2 layer, 2 perimeter, 60% infill. For a stronger connection, I recommend sealing with second glue. Attach the base first, then glue the holders.

Support base for box of water-soluble tablets (such as vitamins/Effervescent)

About: Support base for box of water-soluble tablets (such as Effervescent). Those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base that you can use to stabilize…

Axle block for superflux X XR rails or VESC

OK I made this for the xr rails, does it fit, i tried and it fits, now am i 100% sure? nope made it with 3 heights 1/2 raise // Stock // 1/2 lower remix the original if needed. good luck!

VESC Pint Footpad Connector

Printed in PETG/ABS/ASA with 0.2mm nozzle.

Livescribe A5 Spiral Smart Ruled notebook plate

If you use a Livescribe pen and their A5 Spiral Smart Ruled notebooks this print is for you. Taking notes with a Livescribe pen can result in impressions (aka indentations) on the underlying pages. This simple thin “plate” goes behind the…

TRAMPA VESC Wand cover with grip

Newer version here: https://www.thingiverse.com/thing:4260679 Print it in tpu Print instructions Category: Vehicles Summary Newer version here: https://www.thingiverse.com/thing:4260679 Print it in tpu

TRAMPA VESC Wand cover faster print

Designed to use less material possible and to print in 2.5 hours printing with 0.2mm layer height Print it in tpu Print instructions Category: Vehicles Summary Designed to use less material possible and to print in 2.5 hours printing with…

Gridfinity 1x1 for support base for box of water-soluble tablets (such as vitamins/Effervescent)

About: Gridfinity 1x1 support base for box of water-soluble tablets (such as Effervescent). Additionally those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base…

OBSOLETE CNC PubBox V1 XR Vesc Box

THIS BOX HAS AN IMPROVED VERSION: https://makerworld.com/en/models/963939 I am still working on the documentation, please wait to have these parts made if you're not sure what you are doing. If you know what you're doing, go ahead. Get…

Effervescent Tablet Wall Holder

I re-did GhostCells model from scratch and made it parametric so you can choose how many holes you want. I also changed the thickness here and there to make it print faster and with less material. I added some margin to the holes, which…

Ubox 100v Vesc Model

Representative model for a 100v Ubox Single

Vesc Spintend Cover

Je vous présente le cache de mon Ubox. Je ne voulais pas suivre la méthode traditionnelle qui consiste à placer l’ESC dans une boîte à l’arrière de la planche. Non seulement je trouve cela peu esthétique, mais cela peut également poser…

Garmin LiveScope Plus LVS34 Transducer Cover

Cover for Garmin LiveScope Plus LVS34 Transducer

VESC Onewheel footpad and motor connectors

Print it with the most precise nozzle/layer height/wall width you can. BOM : Footpad 3 * PCB pins header (min length 21mm) Motor 6 * PCB pins header (min length 21mm) 3 * 2mm bullet connector Tips : This mount is deisgn to be “locked”…

LED strip holder VESC Onewheel

BOM : WS2815 Strip Lolin ESP32 C3 Pico WLED Software 2 data pins (front+rear / footpad) 3 segments (front / rear / footpad) Footpad LED Strip : 1 x M3*3 screw Up to 8 LEDs Front/Rear LED Strip : 2 x M3*10 screw Up to 18 LEDs each

Effervescent tab holder

Printed fine for me with 0.6mm extrusion width on 0.4mm nozzle, 0.3mm layer height, 0% infill, and a few millimeters of brim, in black PLA. Holds fine using double-sided tape on the back. Make sure the space you measure for your hanger…

Sim Gokart Vesc Throttle pedal

I am building Vesc based Gokart and I needed throttle pedal based on potentiometer to be able to control motor power via ADC output. Inspired by all Sim pedal designs I was able to find. Everything is easy to print and is requiring…

THOR-300 Fungineer VESC

Step model and bolt pattern for fitment check and getting measurements Designed by fajdiga2001 <discord username

Raiden 7 Vesc ZESC

Step file provided by ZESC for Raiden 7 for checking fitment and getting measurments

LFoc Little Foccer VESC Model

LFOC model for checking fitment and getting measurements

DEPRICIATED: 3DP PubBox for VESC XR FUNWHEEL

THIS MODEL IS INFERIOR TO THE REMIXES. Please Use the remixed boxes instead for a better user experience! 3DP PubBox is what I think is a fantastic blend of cooling, functionality, and compatibility. It is meant to be a middle ground…

PubBox Remix for one wheel vesc - handle delete and different LED window

My remixes of the PubBox 1. handle is removed, no other changes 2. handle is removed + different LED window

Tronic 250r Vesc Model

This is the current 24s version, i am unsure if the design will physically change for the 32s version

Flowpub vescxr controller box

I have now tested this in the 16 pin and 10 pin molex versions both worked out but were pretty cramped less so without the spintend fuse. currently testing another more spacious remix of the pub box that still allows the use of the hyper…

XT90/XT60 Cover for Flowglider Vesc Onewheel Box

Quick&Dirty Project... XT90/XT60 Cover for Flowglider Vesc Onewheel Box ps. attach the connectors with hot glue. Category: 3D Printing

Effervescent Tablets Holder / Brausetablettenhalter

A simple effervescent tablets holder for 10 tubes. The rubberfeet have 6x2mm (https://amzn.eu/d/2eUqjHv)

VESC 4 Case, Flipsky FSESC 4.12

Simple protection case for the Flipsky VESC

X12 BareBoard VESC

model given to me by tronic for the bareboard x12 vesc

Ubox 85v 150a Single VESC Casing

model provided to me by spintend, thanks amy

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Livescribe Echo II Cap

Debido a que la tapa del Livescribe Echo II se rompió, y viendo que no tenía fácil resolución, he diseñado este reemplazo que funciona muy bien. Recomiendo imprimir en PETG y sin ajustes de expansion horizontal, aunque puede ser necesario…

Pint Vesc 20s2p 18650 Battery Box/Bumper

Following Grimm's traditions, step files are better than stl. Please thank Grimm/Nash for the remake. This wouldn't be possible without his step files: https://www.printables.com/model/865559-onewheel-pintx-z-battery-box-remake I made the…

17s2p 18650 Vesc PintX Weld Frame

Here you will find a weld frame, a cad file for visualizing how the pack is connected and a few pictures showing the build. The pack is mirrored with the odd cell group being connected with a long strip of nickel or solder braided cable.…

Onewheel Vesc Button Cover

A simple button cover I designed for my Fungineers Complete Box. Adapted from a design I found for my XR ages ago. I recommend solid TPU. you will need supports but they are on the underside that you'll never see.

Onewheel Vesc GX-16 Port Cover

This is a plug cover for Onewheel Vesc boards using GX16-2 ports for charging. It was specifically designed for XR-style rails, so I am unsure if it will fit other rail types well. The head may be too big for other rail types. I also…

GX16-3 Charge Plug Port for VESC Onewheel

Print in TPU with: .2 height random seams (helps with watertightness) bridge counterbore holes as sacrificial layer (orcaslicer) 4 bottom shell layers (helps with watertightness) 10% gyroid infill

Garmin Panoptix/Livescope Ice mount

BOM STAND (2) ¼-20 SHCS 3" partially threaded (1) ¼-20 SHCS 1" Partially threaded (4) 10-32 3/4" Flatheads (Sharpened to point - optional) COLLAR (2) 6-32 SHCS ¾" Fully threaded BUILD STAND - Install one ¼-20 SHCS 3" and tighten until…

Effervescent tablets

Holder for the Effervescent supplements / tablets

Fungineer Stompies Footpad To Flightfins XR/VESC Fender Adapter

This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since…