ENNOID Mk8 or Mk8 Pro VESC Controller to Thor300 Sheet Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interface for mounting an ENNOID Mk8 or Mk8 Pro VESC controller to a Thor300 hole pattern
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This listing includes:
ENNOID MK8 VESC Controller to Thor300 sheet plate mount.
ENNOID MK8 Pro VESC Controller to Thor300 plate mount for the CNC PubBox.
For the MK8 Pro mounting plate, I've included a split design for cheaper, 2d machining through services like Send Cut Send. Otherwise, the models can be conventionally CNC machined for a relatively low cost as well.
Cutting Instructions
Either:
Send DXF to SendCutSend
Mk8 Pro Top or Mk8 Plate should be 2mm thick
Mk8 Pro Bottom should be 3mm thick (or 3.2mm is fine, from SCS)
Countersink the holes yourself once received
Send to your CNC shop of choice to be machined as-is
???
Mount that thing
Be sure to use thermal paste or pads between the ESC, plate, and box