1 / 4
VESC Onewheel footpad and motor connectors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate with motor and footpad connector for VESC Onewheel Pint
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print it with the most precise nozzle/layer height/wall width you can.
BOM :
- Footpad
- 3 * PCB pins header (min length 21mm)
- Motor
- 6 * PCB pins header (min length 21mm)
- 3 * 2mm bullet connector
Tips :
- This mount is deisgn to be “locked” against the controller box “heatsink”
- You can use the help of soldering iron to push the pins in the hole
- Be sure to secure the wiring from the inside (glue, resin…)