VESC 75100 Potting Fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple part for fixturing a Flipsky/Makerbase VESC 75100 vertically for filling with potting compound.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed to hold a Flipsky/Makerbase "EBike" style VESC 75100 vertically to allow it to be filled with a potting compound to waterproof it. 2x M3x8+mm screws are used to hold the ESC in place.
I used hot glue to seal the edges/seams of the ESC to prevent any potting compound from leaking out. The compound I used was SYLGARD 527 Silicone Dielectric Gel. However, I would recommend using something thicker and more viscous, as the SYLGARD 527 Gel stays tacky and jello-like after curing.
I would also HIGHLY recommend securing the capacitors inside the ESC, as they are very fragile suspended inside the enclosure. I used this model, "Flipsky 75100 Capacitor Mount" by AlbertP on Thingivierse, and super-glued the caps to it and the PCB, then potted everything.
Check out my VESC 75100 Bike Tube Mount here.