1 / 3
MK4 wiring clamps and switch housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two honecomb wiring clamps (for MMU3) with a switch housing between them for the MK4 frame
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my LED bar I wanted to have a switch as the light is not always needed.
Inspired by “Better MK4 MMU3 Wiring clamp” I used the measures and designed a switch housing with two wiring clamps.
The used switch needs a 18x12 mm cut out and a depth of 21mm.
(it's a 6A/250V 10A/125V On/Off switch)
Hints:
- 3x8mm or 3x10mm screws can be used
- I bent the pins to about 45 degree to save some space :)
- Printed with the side containing the cut out for the switch as bottom and added some Support to the holes and inside the “box” (probably not required)
- Power is drawn from the xBuddy-supply (my LED strip only needs around 100mA)
Assembly:
Insert the cables through the according holes, connect one pair and attach the second pair to the switch, then insert the switch.