1 / 3
MK4 wiring clamps and switch housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two honecomb wiring clamps (for MMU3) with a switch housing between them for the MK4 frame
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my LED bar I wanted to have a switch as the light is not always needed.
Inspired by “Better MK4 MMU3 Wiring clamp” I used the measures and designed a switch housing with two wiring clamps.
The used switch needs a 18x12 mm cut out and a depth of 21mm.
(it's a 6A/250V 10A/125V On/Off switch)
Hints:
- 3x8mm or 3x10mm screws can be used
- I bent the pins to about 45 degree to save some space :)
- Printed with the side containing the cut out for the switch as bottom and added some Support to the holes and inside the “box” (probably not required)
- Power is drawn from the xBuddy-supply (my LED strip only needs around 100mA)
Assembly:
Insert the cables through the according holes, connect one pair and attach the second pair to the switch, then insert the switch.