Retro toolbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retro toolbox
- Ocena
- 4,6 / 5
- Polubienia
- 271
- Pobrania
- 358
- Wydruki
- 5
- Wyświetlenia
- 4485
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hello !
If you like my work, please rate it.
Mini version of an old toolbox. 200x100mm base area. Removable dividers.
Kitűnő ajándék lehet:
-for a mechanic
-for artificial nails, eyelashes
-they are fishing
A bit of a pain to put together, but at least it's challenging. I tested it. One of the pictures shows the necessary adhesives. It's worth gluing the fasteners of the snaps together. The dividers may require a little deburring. I recommend printing the plastic snaps more slowly and with a smaller layer height so that they are stronger.
If you have any questions, don't hesitate to ask.
The X4 at the end of the slt files means that 4 pieces of it need to be printed.
The grip support can be difficult to remove. If this is a problem, print it upright using a brim.
I made 3 versions:
-smooth, simple (slim)
-skin01 (honeycomb)
-skin02 (striped) this is what I printed
When assembling, make sure that the "screws" turn in the arms, otherwise it will get stuck when opening.
Bb.