Retro toolbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retro toolbox
- Rating
- 4.6 / 5
- Likes
- 271
- Downloads
- 358
- Makes
- 5
- Views
- 4,485
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Hello !
If you like my work, please rate it.
Mini version of an old toolbox. 200x100mm base area. Removable dividers.
Kitűnő ajándék lehet:
-for a mechanic
-for artificial nails, eyelashes
-they are fishing
A bit of a pain to put together, but at least it's challenging. I tested it. One of the pictures shows the necessary adhesives. It's worth gluing the fasteners of the snaps together. The dividers may require a little deburring. I recommend printing the plastic snaps more slowly and with a smaller layer height so that they are stronger.
If you have any questions, don't hesitate to ask.
The X4 at the end of the slt files means that 4 pieces of it need to be printed.
The grip support can be difficult to remove. If this is a problem, print it upright using a brim.
I made 3 versions:
-smooth, simple (slim)
-skin01 (honeycomb)
-skin02 (striped) this is what I printed
When assembling, make sure that the "screws" turn in the arms, otherwise it will get stuck when opening.
Bb.