1 / 4
Firework
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — NoDerivatives
Fireworks perfect as a New Year decoration
Printing parameters:
- material: PLA
- temperature: 195°C
- speed; 30-35mm/s
- layer: 0.2mm
- infill: 25%
- supports: in one file
- nozzle: 0.4mm
NOTE: the model should be printed slowly due to large angles
The supports are required on the "Base Red" model, the picture below shows where
Assembly instructions:
- you need to connect both elements "Base" and "Top Cap"
- screw the elements that you connected
- screw the “Stick” WARNING: do not tighten too much because you will break the thread for a more secure grip you can use glue
- put the "Fuse" in place