1 / 4
Firework
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — NoDerivatives
Fireworks perfect as a New Year decoration
Printing parameters:
- material: PLA
- temperature: 195°C
- speed; 30-35mm/s
- layer: 0.2mm
- infill: 25%
- supports: in one file
- nozzle: 0.4mm
NOTE: the model should be printed slowly due to large angles
The supports are required on the "Base Red" model, the picture below shows where
Assembly instructions:
- you need to connect both elements "Base" and "Top Cap"
- screw the elements that you connected
- screw the “Stick” WARNING: do not tighten too much because you will break the thread for a more secure grip you can use glue
- put the "Fuse" in place