Calamity Toolhead - CPAP Cooling (3628 fan plate)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod to use CPAP cooling with the standard Calamity Toolhead 3628 fan plate
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod to allow using CPAP cooling with the Calamity Toolhead. I already had the 3628 fan plate, so I designed the CPAP portion around that - the ducts are definitely not optimized, but they seem to work well on overhangs and bridging.
I plan to optimize the CPAP routing for space, most likely moving away from the 3628 fan plate (they're unnecessary when using CPAP and reduce your X travel), but will most likely create a separate mod for that. At the moment, this works well enough for me!
If using in an enclosure, make sure you print this out of something like ABS or ASA!
Installation
- You'll need to carefully bend the top CPAP ducts around the back of the toolhead if you already have the entire toolhead installed, or slip them on before you start securing the 3628 fan plate
Print Settings
- Infill: 40%
- Walls: 5
- Bottom/Top: 5
Klipper Config Changes
[stepper_x]
position_min: 13.5
position_max: 284.5
position_endstop: 284.5
If you need help setting up the Calamity toolhead, or moving to a Chube Air or LGX Lite Pro, my Klipper configs for my Doomcube are here (updated nightly):
- Entire Repo: https://github.com/matthewj301/doomcube/tree/main
- Calamity Toolhead Portion: https://github.com/matthewj301/doomcube/blob/83ce2610adc1e311a02a6e47a5709a5859ae48d0/custom/toolheads/calamity.cfg
Happy printing!