T1 Ranger tail boom connector with 2x servo connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this mod you won't need to re-plug the tail servo anymore.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
0.1 layer height, nylon for 2 main parts(random seam, needs very precise printer, don't forget the water treatment for nylon). PETG/PLA for alignment tools.

Main part 1 - Tail_boom_connector (Nylon, massive brim included)

Main part 2 - Tail_boom_servo_conn_holder (Nylon)

Alignment tools (PETG/PLA)
Tail_boom_servo_conn_tube_spacer

Tail_boom_servo_conn_holder_handle

Overall view

Connector notice: use the flat servo connectors (2 on the left) NOT the right one.

I used those from AE (10 cm). You will need 2pcs.

Assembly is straight forward:
- Fish the wires through.

- Apply CA glue on servo connectors and insert them in the main tube using the bigger tool. (The tool goes all the way in)

- You should get this

- Insert repinned (reversed pinout) servo connectors for the tail servo and a buzzer (or any other thing you may mount on the tail boom)

- Use another tool to glue it inside the boom

- It should look like this. Note the red tape - this shows how deep you can insert the tube (can prevent not-fully-inserted boom problem)

