1 / 5
T1 Ranger tail boom connector with 2x servo connectors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this mod you won't need to re-plug the tail servo anymore.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
0.1 layer height, nylon for 2 main parts(random seam, needs very precise printer, don't forget the water treatment for nylon). PETG/PLA for alignment tools.

Main part 1 - Tail_boom_connector (Nylon, massive brim included)

Main part 2 - Tail_boom_servo_conn_holder (Nylon)

Alignment tools (PETG/PLA)
Tail_boom_servo_conn_tube_spacer

Tail_boom_servo_conn_holder_handle

Overall view

Connector notice: use the flat servo connectors (2 on the left) NOT the right one.

I used those from AE (10 cm). You will need 2pcs.

Assembly is straight forward:
- Fish the wires through.

- Apply CA glue on servo connectors and insert them in the main tube using the bigger tool. (The tool goes all the way in)

- You should get this

- Insert repinned (reversed pinout) servo connectors for the tail servo and a buzzer (or any other thing you may mount on the tail boom)

- Use another tool to glue it inside the boom

- It should look like this. Note the red tape - this shows how deep you can insert the tube (can prevent not-fully-inserted boom problem)

