BMG Extruder with filament sensors for MMU (Work in Progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMG Extruder with filament sensors for MMU
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1079
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this with the intention of using it in a 3MS MMU setup with the filamentalist respooler.
The gear position was sourced from bmg (BMG Extruder | 3D CAD Model Library | GrabCAD) and retrofitted to the remix of the author Bobblejot to ensure the printed model would work.
- The only change i had to do was the original lever arm seems to overlap the BMG extruder gear, so i made a cut just like the original injection modeled one.
I then added a 2x Omron D2F-L endstops + 4mm Steel Ball bearing to act as filament sensors.
It was important to me to make the extruder as low as possible so it might be a bit cramped inside.
Designed to be used with 1.75 mm filament
Step and Fusion365 file included
Change log:
v0.1 - 01 jan - Remix
v.0.2 - 03 jan - increased tolerance for 8mm bearing + endstops, and moved the 8mm bearing 0.542mm closer to the filament path (as the original bmg extruder) for better gear alignement.
if you like my work, feel free to buy me a coffee:
https://www.paypal.com/donate/?hosted_button_id=Y6YT7MXSHTWQS