BMG Extruder with filament sensors for MMU (Work in Progress)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BMG Extruder with filament sensors for MMU
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 199
- Makes
- 0
- Views
- 1,087
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this with the intention of using it in a 3MS MMU setup with the filamentalist respooler.
The gear position was sourced from bmg (BMG Extruder | 3D CAD Model Library | GrabCAD) and retrofitted to the remix of the author Bobblejot to ensure the printed model would work.
- The only change i had to do was the original lever arm seems to overlap the BMG extruder gear, so i made a cut just like the original injection modeled one.
I then added a 2x Omron D2F-L endstops + 4mm Steel Ball bearing to act as filament sensors.
It was important to me to make the extruder as low as possible so it might be a bit cramped inside.
Designed to be used with 1.75 mm filament
Step and Fusion365 file included
Change log:
v0.1 - 01 jan - Remix
v.0.2 - 03 jan - increased tolerance for 8mm bearing + endstops, and moved the 8mm bearing 0.542mm closer to the filament path (as the original bmg extruder) for better gear alignement.
if you like my work, feel free to buy me a coffee:
https://www.paypal.com/donate/?hosted_button_id=Y6YT7MXSHTWQS