Nerf Motoblitz Flared Magwells and Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop-in replacement mod to replace the stock magwell in the motoblitz, as well as a complete replacement.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These files are meant to be a drop-in replacement for the magwell in the Nerf Motoblitz. The file list consists of:
- A replacement magwell (If you somehow lost it).
- A flared magwell with the back panel removed to fit older Nerf magazines with a nub on the back and any extended mag releases you may want to use with this (Recommended).
- A flared magwell without the back panel removed.
All files are also available as a .STEP file if you want to modify the files further.
Supports are mandatory, if the overhangs are allowed to droop during printing the magwell may not fit (Of course, you could always do some post-processing). Brims are recommended. Print the model with the flared section pointing up on the Z-axis.
Keep in mind that due to 3D printer tolerances not being 100% perfect, you may have a magwell that doesn't fit perfectly with your Motoblitz or mags. Your printer may need some more calibration or the mag release will slowly loosen up over time as bits are ground away.
If you would like to print the extended mag release used in the pictures, you can find it here.