MyLaps Transponder Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a friction fit MyLaps Transponder mount for RC vehicles, notably the Slash (derivative chassis) and many others.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a friction fit MyLaps Transponder mount for RC vehicles, notably the Slash (derivative chassis) and the Tekno vehicles.
Printing:
Infill: 42% or similar because it's the answer to everything
Filament: KVP ABS
Layer Height: 0.2
Print just like you would any other structural part, as long as your printer is dialed in this will work a treat.
Added a bit more substance to the base model as this now allows a friction fit of the transponder with no servo tape needed. Please let me know if this was helpful to you. Original inspiration https://www.thingiverse.com/thing:4370224