Liczymy pasujące modele…
ATTENTION: the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead. a simple mount for the hobbywing ezrun esc. the sct/mt410 2.0 chassis offers a place to…
Print details: Material: Petg,FLEX Layer height: 0.15mm or 0.2mm Supports: Yes Infill: 15%
Holds MiP drivers and a 3'' harbor freight magnetic tray
Petit porte clef avec le logo de tekno rc. Print in place
Replacement body post for the Tekno SCT410 2.0. 70mm long with only a top hole, drill hole where needed or add in CAD. Did not make many holes to not lower the strength of the post, introduce extra failure point.
My cars' winter tyres where fitted on Tekno Wheels rims, and the center hole caps were in really bad shape, so I made these. These fit 48mm center hole. Scaling on XY might allow you to fit them on other hole sizes too. STL is just plain…
You need two M3x25 and two M3 Nuts. Print the holder and Thumbscrew twice. Just add a pause after the hex section on the thumbscrews, add a M3 Nut to your print and resume. The M3 bolts I glued into the holders. Fit my Gens Ace 6570mah…
I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.
designed some mudflaps for the Tekno SCT410 2.0 for an more scale look. you need: 6x m3x10mm screws 6x m3 nylock nuts 6x washer (optional) 2x mudflap mounts (preferred in petg or nylon) 2x mudflaps (preferred in tpu or cut a 2mm rubber…
Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag
juego de bandejas para coche rc tekno 2.0
Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag
A dusthood tailored for the Teknomotor 1.1kW COM31400414 spindle, allowing unimpeded airflow from the fan to prevent spindle overheating while ensuring effective extraction. Two 80mm hoses need to be connected and secured using hose…
See diagram for assembly instructions. Needs 4, print laying on flat sides TKR7798 PRO607002 93245A115 94180A351
The original circuit box for the Tenkomotor 1.1kW spindle COM31400414 can be challenging to wire and could potentially result in cable damage or loose connections, especially if not regularly handled. Exploring its compatibility with…
Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.
Print details: Material: PLA Layer height: 0.2mm Supports: NO Infill: 15% Multimaterial painting SMART FILL
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Device_Order = -1 MicroSD_gap = 3 SD_gap = 2…
soporte trasponde principalmente para el tekno rc 1.8 se ajusta sobre la bateria para trasponder tipo lapmonitor jr
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: USB_Extra = 8 Sign_TEXT = MrTeknology…
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Sign_HEIGHT = 6 Pencil_radius = 4 Sign_FONT =…
Customized version of http://www.thingiverse.com/thing:273099 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=273099 Instructions Using the following options: basey = 75 basex = 190 borderwidth = 2…
I created this to help with charging my Aspire Tekno vape as they have an offset USB port on the bottom of the battery. This allows me to plug the battery into the stand and still see the screen for charge status. It also acts as a stand…
@teknoseyir youtube kanalı videolarında yıllardır masada, sehpada bir şekilde ekranda gördüğümüz o cnc metal logoyu teknoseyirin 14. yaşı adına anahtarlığa çevirdim. teknoseyir kasası ve sanırım o logoyu da hazırlayan ağabeye de buradan…
Got a sweet Tekno RC kit and struggling to assemble your servo saver? Yeah, me too. I just fought that battle and lost. It was "assembled" afterwards, but the nut was cross-threaded and destroyed. Even better, I mangled all the plastic…
One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package ( part number TKR6576 ) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or…
Summary 🇹🇷 🇬🇧 TURKISH & ENGLISH DESCRIPTIONS ARE AVAILABLE BELOW DESIGNED FOR AeroTech M1850W MOTOR 📁 FILE MANIFEST (INCLUDED FILES): .step : 3D CAD Model of the Rocket .ork : OpenRocket Simulation File .pdf : Technical Drawing (2D…
A switch mounting bracket for MT48 2.0. Requires M2.5 or M3 screws (countersunk). Both with and without support
Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.
Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.
Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag
Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag
This a V6 and T-V6 nozzle box made from the jar of my favourite hair wax (Mat Wax by Tekno). Here in Italy you can find it everywhere.
