Tekno SCT410SL Rear Hub Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement spacer where the camber link connects.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package (part number TKR6576) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or mirror the STL so the holes are on the left side as well.
Print with a 0.2 nozzle if possible. I attached a 3mf with everything already set up. Any material should do, PLA/PETG. These pieces aren't under a ton of pressure provided you have a washer on the screw side, so even regular PLA should hold up no problem.
Print 100% infill, I used 0.08mm layer height. Make sure to turn on “Detect thin wall”. Make sure the seam is not within the holes (I had to change my Seam position to “Back”).