Tekno SCT410SL Rear Hub Spacers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement spacer where the camber link connects.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package (part number TKR6576) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or mirror the STL so the holes are on the left side as well.
Print with a 0.2 nozzle if possible. I attached a 3mf with everything already set up. Any material should do, PLA/PETG. These pieces aren't under a ton of pressure provided you have a washer on the screw side, so even regular PLA should hold up no problem.
Print 100% infill, I used 0.08mm layer height. Make sure to turn on “Detect thin wall”. Make sure the seam is not within the holes (I had to change my Seam position to “Back”).