Spool Holder / Miscellaneous Holder for Wire Closet Racks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model provides a way to easily mount spools to your 1in wide wire closet rack with no bolts or other hardware.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw other models for spool holders for wire racks, but I liked the idea of having multiple spools on the same rack to save filament, so I created this modular system where you can select the height you want to hang the spools or other items, then select the span you want and have the ability to store up to 3 full spools on the 9-10in span versions of the rod. The rod is strong enough to support 3 spools.
For my pictures I printed the 6in tall rod holder and the 9.75in tall rod (the rod holder takes up .25in of the span, so the 9.75in rod will span between 10in of closet racking).
The tall rods are NOT easy to print. It took several attempts to get them to print properly. I printed with .25mm layer height, 6 walls, and speeds of 30-40mm/s with low jerk and acceleration settings. Any faster would cause the print to fail at about 6-9in tall. This might be solved if not using a bed slinger, but my printer is a bed slinger.
I modeled these in inches and all dimensions are in inches due to the fact that the closet wire racking is 1in wide, so I thought it was easiest to model this in inches, but the files were exported to mm, so should not require any scaling in the slicer.