P
PrintablesPerryusaf
Closetmaid Wire Shelf Hat Holder
If you are having a hard time snapping the hanger onto the wire rack try adjusting the x-y hole compensation by -0.2mm.
- Pobrania
- 417
- Polubienia
- 105
- Ocena
- 4
Wyniki wyszukiwania: closetmaid
Liczymy pasujące modele…
P
PrintablesEadubs
Closetmaid Wire Shelf Clip
This is a remix of the "Rubbermaid Closet Wire Shelf Clip" by Prateek R. This one is for my Closet Maid wire shelves which have a clip that is a little bit longer between the shelf and the screw hole. I made it to use some drywall hangers…
- Pobrania
- 341
- Polubienia
- 48
- Ocena
- 5
P
PrintablesAnthony Lambruschi
ClosetMaid Wire Shelf Label
I wanted to label the freshly organized wire closetmaid shelves to ensure they stay that way and the closest solution I could find was slightly too large for my shelves so I trimmed it down to size! Model is now 26mm tall and ~72mm…
- Pobrania
- 229
- Polubienia
- 31
- Ocena
- 5
P
Printableschking
Closetmaid Rod End Cap
An end cap for the Closetmaid rod ( https://www.amazon.com/ClosetMaid-2051-SuperSlide-Adjustable-Hanging/dp/B00KZZ5JZQ ).
- Pobrania
- 184
- Polubienia
- 17
- Ocena
- 5
P
PrintablesBen Berry
ClosetMaid 3-wire Clothing Shelf End Cap
The ClosetMaid shelving that was installed in our house uses a third wire that the clothes hangers can slide on. That bottom wire relies on the end caps to support the weight and stop clothes from sliding off the end. We reconfigured our…
- Pobrania
- 178
- Polubienia
- 26
- Ocena
- 5
P
PrintablesBear Creek 3D
ClosetMaid Shelf Hangers
Needed a place to hang dog leashes, backpacks, laptop bags and the like. Zwoop's original design only fit on the front bar of my wire shelves so I decided a re-mix was in order. Will fit other brands of wire shelving, see notes below.…
- Pobrania
- 168
- Polubienia
- 48
- Ocena
- 0
P
PrintablesTechplex
Closetmaid Super Slider for generic shelving
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…
- Pobrania
- 116
- Polubienia
- 18
- Ocena
- 5
P
Printablesnitr1c
Rubbermaid/Closetmaid Vertical Rail Three-Hook Mount
This is secure and strong mount for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails, which attaches into three levels like the Rubbermaid FastTrack shelves. To install, angle the top in first, then bring the mount's inner…
- Pobrania
- 108
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMST8K
Rubbermaid/Closetmaid Free-Slide End Cap
I am not sure if this is for the Rubbermaid or Closetmaid versions, but it looks just like this one: https://www.lowes.com/pd/Rubbermaid-FreeSlide-Corner-x-12-in-White-Universal-Wire-Shelf/50336061 Check the measurements of your shelves…
- Pobrania
- 102
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTom B
Closetmaid Shelf Hook
Purpose: This hook is designed to allow items to be stored/hung in-front of Closetmaid shelving. Overview: This object is a remixed version of the Shelf hook for boxes by siderits. The major changes from the original are as follows: Hook…
- Pobrania
- 96
- Polubienia
- 23
- Ocena
- 0
P
Printablesarp24
Hanging hook for closetmaid wire shelves
Small hook for hanging stuff underneath Closetmaid wire shelves. Designed from scratch with my own measurements, although I did take inspiration from the design Closetmaid Wire Shelf Hat Holder . Thank you, @perryusaf I printed it with 2…
- Pobrania
- 95
- Polubienia
- 21
- Ocena
- 0
P
Printablesredzzzer
Rod Hanger ClosetMaid
Someone thought they could hang on a rod in our ClosetMaid organizer and snapped the locator pin. Measured up the good one and created this model for replacing the broken one. Worked well, and only needed minimal support. The locator pin…
- Pobrania
- 88
- Polubienia
- 5
- Ocena
- 5
P
PrintablesBill Cutlip
ClosetMaid "Wood" Shelf Label Holder
A print to hold a label on an Elfa or similar thickness shelf to help with organization. For shelves ~0.6 in or ~15 mm thick. The model prints in two pieces (the clip and the label holder). Can either snap together and leave as is or add…
- Pobrania
- 82
- Polubienia
- 23
- Ocena
- 0
P
PrintablesRox
Closetmaid Shelf & Rod Hook
Based on the original "Wire Shelf Hook", I've modified this to fit the heavy-duty shelf & rod system by Closetmaid. Printed with PLA, 0.4mm, 100% infill, no supports if printed on its side. Fill the bed with clones! These are so useful!…
- Pobrania
- 81
- Polubienia
- 14
- Ocena
- 5
P
PrintablesJustinline
ClosetMaid J-Hook Clip
This is a simple, beefy and deep J-hook for use with ClosetMaid shelves. It is easy to print and install to get more out of your shelves. Print without supports. Default print settings should be good enough, but you can increase infill…
- Pobrania
- 72
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBuild It Basement
Wire Shelf (Closetmaid) Side bracket
Another fun and simple design from the Build it Basement! This time, I needed a simple and strong side bracket for my son's ClosetMaid 20" shelving. I was going to buy some at the store until I saw they were overpriced and UGLY. These are…
- Pobrania
- 72
- Polubienia
- 19
- Ocena
- 5
P
PrintablesLegendaryAstralHammer
ClosetMaid Wire Shelf Labeled
Added multi-color printed on labels to fit my closet.
- Pobrania
- 70
- Polubienia
- 14
- Ocena
- 0
P
Printableschking
Closetmaid Super Slider for 1.5 Inch Generic Wire Shelving
This is a modified version of the Closetmaid Super Slider ( https://www.amazon.com/ClosetMaid-5655-SuperSlide-Universal-Support/dp/B000KL4CGM ) that I remixed to attach to 1 1/2 inch wire shelving. See the original for instructions on how…
- Pobrania
- 67
- Polubienia
- 17
- Ocena
- 0
P
PrintablesChicodemilo
Cord Snuggler for ClosetMaid ShelfTrack
I shall harness all the cords dwanglin' from my cheap closetMaid shelves. If you too have cord dwanglin chaos... don't
- Pobrania
- 57
- Polubienia
- 19
- Ocena
- 0
P
PrintablesDavid Hickey
Closetmaid Corner clip
build it up right with supports
- Pobrania
- 47
- Polubienia
- 15
- Ocena
- 0
P
Printablesarp24
ClosetMaid wire shelves connector bracket
This is a model of a connector bracket for joining two sections of ClosetMaid wire shelving at the front, thus ensuring that they are aligned and can distribute the load. I had some wire shelving pieces lying around and wanted to make…
- Pobrania
- 45
- Polubienia
- 13
- Ocena
- 0
P
PrintablesTom B
Ikea OBSERVATOR Bracket for Closetmaid Wire Shelving
This bracket was designed to allow an Ikea OBSERVATÖR wire basket to be attached to a ClosetMaid Close Mesh Wire Shelf. These baskets can be had for around $3 USD, which is a bit cheaper than the ClosetMaid version of these baskets. Feel…
- Pobrania
- 40
- Polubienia
- 11
- Ocena
- 0
P
PrintablesRichard
Key Hook for Closetmaid Shelves
Basic Key Hood designed for Closetmaid wire shelves. Print as oriented in file for best strength.
- Pobrania
- 35
- Polubienia
- 7
- Ocena
- 0
P
Printablesjdavis428
ClosetMaid Closet Rod Adapter
Simple adapter that allows you to use the closet rods from the ShelfTrack kit on a regular wire shelf. It fits snug and has held up in my closet for 10 months now without issues. Printed in PLA, 0.2mm layer height.
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCheese
Cable clamp for ClosetMaid uprights
The extension cord for our vacuum charging dock was always in the way, so I wanted to hold it tucked up against the wall. I tried Chicodemilo's Cord Snuggler for ClosetMaid ShelfTrack but it was too large for a single lamp cord. So I…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 4,5
P
PrintablesCmwoodman
ClosetMaid side rail clip
Needed to keep things from falling off the side of a suspended shelf and found a use for that 4” of leftover shelving. print on end for best results
- Pobrania
- 27
- Polubienia
- 10
- Ocena
- 0
P
PrintablesAva
Quick cable hanger for closetmaid wire shelves
What? Hang cables from the underside of wire shelves. These cable hangers use the flexibility of plastic to secure the cables in a way where they're easy and fast to insert and to grab. Compatibility The cable hangers are designed for…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBrisk-OH
Closetmaid Headphone Holder
I needed a place to hang my headphone in the garage that I use when I do yard work. I took the hook from the justinline model and added a simple headphone holder to the end of it. I used pla+ and 20% infill.
- Pobrania
- 23
- Polubienia
- 7
- Ocena
- 0
P
Printablesnitr1c
Rubbermaid/Closetmaid Single Slot Tiedown
This is a single slot hook mounted tiedown point for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails. It works by sliding the longer end up into the rail, pushing the part into the rail's outer face, and then pushing down…
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
PrintablesScatterthought
ClosetMaid Shelf Clip Spacer
I was having trouble installing a wire shelf in a closet, as the corner isn't square. As a result, one of the wall clips couldn't reach the drywall. I made this spacer so that I could get a solid connection with no wiggles in the shelf.…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDestrokhan
Closetmaid End Cap
This end cap fits the larger gauge wire on the Closetmaid wire shelf, the internal diameter is 8mm so you can shrink it down to fit the smaller wire in your slicer if you know the diameter of that. Print in TPU and upside down for best…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 5
P
PrintablesTom B
Closetmaid Shelf Hook(able) Container
Made a container to hold small items on the shelf. In this case, I wanted to hold Sharpies with their tip DOWN so that's what it holds. I printed this out of TPU to have some flexibility so I could hold the markers even if they are a…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSpartanIvy
Closetmaid Shelftrack Bracket Stop
I wanted to hang up some PVC pipes on my garage shelving without using a whole shelf, so I made these little plastic inserts that slot into the Closetmaid Shelftrack brackets. I'm using it with 12" long brackets but it should fit other…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKelly Totten
ClosetMaid Wire Shelf Filament Rack
This will allow you to store your filament underneath 16" Closetmaid wire shelving. The holes are sized for 1/2" dowels, but due to wide variations in dowel sizes, some adjustment may be necessary. I used the closed model on the ends with…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Closetmaid Shelf Hook(able) Container
Made a container to hold small items on the shelf. In this case, I wanted to hold Sharpies with their tip DOWN so that's what it holds. I printed this out of TPU to have some flexibility so I could hold the markers even if they are a…
P
Printables
Closetmaid Shelf Hook
Purpose: This hook is designed to allow items to be stored/hung in-front of Closetmaid shelving. Overview: This object is a remixed version of the Shelf hook for boxes by siderits. The major changes from the original are as follows: Hook…
P
Printables
![ClosetMaid SuperSlide Hanging Rod Support [drop-in replacement]](https://media.printables.com/media/prints/5ca5d66e-bfdc-4af6-b8b1-306aa7687180/images/9690433_56fff4e2-0403-4f92-a5f9-1a3c74895e2b_228b18bc-bf4f-4392-bd3c-c9194e538ee5/closetmaid-superslide-hanging-rod-support-drop-in-replacement-img_1039-featured-image.jpg)
ClosetMaid SuperSlide Hanging Rod Support [drop-in replacement]
This is a printable drop-in replacement for the store-bought “ClosetMaid SuperSlide Hanging Rod Support” sold at places such as Lowe's. These things need to be able to take a lot of weight, so print it strong. I printed at 4 walls and 30%…