ClosetMaid J-Hook Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple J-hook for use with ClosetMaid shelves. It is easy to print + install to get more out of your shelves.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple, beefy and deep J-hook for use with ClosetMaid shelves. It is easy to print and install to get more out of your shelves.
Print without supports. Default print settings should be good enough, but you can increase infill for more strength. PETG is suggested, but this will work well when made from PLA or other filaments.
To instal the hook, push the rear clip portion over the edge of the ClosetMaid shelf. It'll flex and click over the metal rod. Then keep pushing it over the 2nd / bottom metal rod of the shelf for a secure fit.