Rack N Pinion Safe Valet / Keepsake Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another valet box.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a novelty Valet Box in the form of and reminiscent of a large safe. The body comes in three configurations, empty, one shelf and two shelves.
This box may be scaled to suit. One caution, however, in scaling the unit down. Small parts may be hard to print or not come out satisfactory unless printed with a small nozzle. The designed size is: 9" x 6.25" x 5.5" deep, and is the size shown in the pictures.
The box and parts shown in the pictures are printed with a .6mm nozzle and will probably look better printed with a smaller nozzle.
In addition to being a good keepsake or "wallet and keys" box, it also makes a good book end.
The parts are attached using a few small drops of CA glue (super glue). This box is fairly easy to assemble, however, one should have some arts and crafts skills and be able to work with precision. A small amount of post processing may be needed for proper operation.
Tip: Instead of CA glue, if you use a very small amount of epoxy or equivalent adhesive it will give you more time to adjust the hardware precisely. It is, however, a bit messier.
New license in effect as of 7/2/26.