119 modeli
Atomic Stack is a midcentury-modern-inspired modular drawer system Stack it up as high as you want. Different containers have alignment holes to add another container on top, or choose the top container or valet tray to have a clean top.…
Provides several different gridfinity bins/widgets that can be used to create desk-valets or pocket-valets. While these should work well with almost any gridfinity baseplate they are designed to work best with the “ Gridfinity Refined ”…
Watch stand for holding 2 watches including small valet tray for miscellaneous items.
Keep your everyday essentials neatly organized with this practical EDC valet tray.
Tray version of Popandsicle's EDC shelf
Schleich compatible set of cavaletti rails (stand and a rail/pole). Usage: Print two stands and one pole. Pole is single colored. Note: Use brims when printing poles horizontally. Support: No supports required.
My EDC tray measure 13,78” x 9,8” x 0,8” (35cm x 25cm x 2cm). It has: 4 compartments of which one for a phone with openings for the charging cable, one slightly incline for glasses and 2 generic. A removable book holder/bookmark/ book…
This is gridfinity heresy. I found that for a pocket valet the grid size of “standard gridfinity” was just a wee bit too large. This matrix is based on 35mm (which is still a multiple of 7) instead of 42mm, all remaining gridfinity…
Printed in PLA, 0.2mm layer height, no supports needed. I'm using an 8mmx35mm steel dowel ( https://www.amazon.com/gp/product/B07Z6GHGZ5/ ) as a hinge pin. I've tried using a printed part but it was either too loose and the lid wobbled or…
Help keep your yarn from getting tangled up underneath the spindle... I had a problem with the yarn always getting tangled up under the spindle so I designed this yarn guide to fit in the slot already in the Yarn Valet. This prints in…
All your edc items at your fingertips! The modular EDC trays have a standard size so they can fit anyone who doesn't want to look for their EDC items every morning. Simple to print it can easily be printed by anyone buy the way, I advise…
Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…
Headband with two hearts on it. For Valentine's Day or any day you want to spread a little extra love with your hair accessory fashion.
Everyday Carry Valet Tray Room for your phone, card wallet, and keys. The trays are laced with a TPU inlay to make them softer and somewhat grippy. There are two options with either room for a charger cable for your phone or a wireless…
This tray was designed for use on a dresser/bedside table as means to organize/sort everything from your pockets. The large tray can be used for your phone or electronic devices allowing for the cable to run through the slot. The cup dish…
This is a coat hanger which can be mounted to an IKEA Pax wardrobe. The design is a copy of the original "IKEA Pax KOMPLEMENT Valent Hanger" which can be bought from IKEA. I changed the design of the original one so that it is shorter,…
Nothing much to say here, just a plain valet tray that can be customized in OpenSCAD. I included an STL file with a main tray that can accommodate an iPhone Pro Max and two additional compartments for keys, pocket change, lint :) , etc.…
This is an all-in-one Apple Watch utility holder. The charger fits nicely in a vertical slot allowing the watch to charge vertically and display nightstand mode. It also has a place to store wallet, keys, extra watch bands, extra change,…
This is a valet or EDC tray in dog paw design. You might want to scale it for nice fitting.
Another item to introduce some order to my desk at work - designed to hold my wallet, my keys, and my earbuds (Google Pixel Buds). I designed this as 100mm deep, 100mm wide, and 175mm tall - I'm working on a system of desk organizers that…
Valet Tray All dimensions in mm Overall dimension 13x200x200 Phone compartment 90x190 (16 gap left for usb-c) Wallet compartment 95x118 Keys compartment 95x67 Compartment separators are 10 high.
This is a dead simple valet tray with a few pragmatic features. Its light, low and thin. There are two compartments with raised ribs on the bottom. The ribs give it a little strength. They make it easier to get your fingers under flat…
A stout custom tray, beefy enough for everyday use, has been accented with a breaching Humpback Whale. It's ocean sized (about 8 inches across) so it will keep all your gear in one place. While printing the whale the loose fin acts as a…
All of the content from this model has been upgraded and moved into Gridfinity Refined (Valet) Change History: 2023-03-04: Replace this model with Gridfinity Refined (Valet) 2023-01-24: Retire this model and replace it with:…
Il s'agit d'un petit chevalet “réservé” pour les restaurateurs notamment. vous pouvez vous en servir pour le poser sur une table pour signaler que la table est réservée. Dimensions du model: 6cm de long ; 3cm de haut et de large Très…
This model has been replaced by a newer model: “ Gridfinity Refined (Valet) ” This is “another” gridfinity pocket/desk valet. File Naming Files are named simply: Grid indicates a gridfinity base, Bowl is a widget that has a curved…
This is a coat hanger which can be mounted to an IKEA Pax wardrobe. The design is inspired by the original IKEA product “IKEA Pax KOMPLEMENT Valent Hanger”. I changed the design of the original one so that it is shorter and has only two…
Wanted to MMU this for the kiddos, but the hands and the heart had some weird interfacing of two discrete objects which really limited the way I could paint it in the slicer. So, cleaned that up, and shared as a 3mf project.
The original cover on my valet key came off and was lost. I thought it would happen eventually since it is not that secure. I designed a replacement for it and it has been working rather well for the last 3 months. I tested the fit on…
I created this for the contest, Have not printed it for I don't currently have enough filament to. But it is designed to hold probably 99% of phones, as well as tons of wallets, a space for airpods, a space for a swiss pocket knife, and a…
A simple valet tray with filleted edges that can be used to keep your everyday carry in one place, or help out with those small silicone ice trays that so love to spill. For those of you looking to make something extra special, I've…
Backplate for Valeton GP-5 pedal to attach to pedalboards using Velcro. I modeled it to use the original screws, so you don't need to tighten it too much. I'm not the best modeler, but I tried my best. I used Freecad 1.0 to model it. It…
With a clean and essential design we have designed and created the Valet Tray Lily without supports Clean the plate well before printing because the model does not need brim If you appreciate my work follow me and post your photos
I make several different styles of desk organizers and valets on my CNC router to sell at craft shows and on Etsy, and thought I would share one of them here for everyone to 3D print. This small desk valet will hold the largest mobile…
Modular valet / edc tray individual configurable and connectable. The system can be extended individually. Extensions: 2 Inserts for parts / coins 2 watch holders (small and high) Support ipad holder (incl. pen holder) socket for smaller…
Don't lie... we all use our phones while we do our business. But where do you put your phone down once your legs fall asleep? Toilet Valet!! Prevent germs on your face and let Toilet Valet hold your precious cellular device. And the best…
I designed this to look like the classic leather valet tray with pinched corners.
It’s nice to have a pen/pencil valet on the tool peg board. By making the pegs separately from the valet, added install flexibility is achieved. The valet is designed for printing in vase mode. I was pleasantly surprised to find it…
This is a valet tray/ jewelry tree. It's printed with a 0.2mm hardened steel nozzle on an Anycubic Kobra 3 with an ACE Pro material handler. I've used Sunlu Wood PLA Maple and Cherry for the filaments, with a base layer of black PLA.
Pour immobiliser rapidement une planche ou autre sur un établi de type MFT (à trous de 20 mm). Il suffit d'enfoncer le valet, de lui frapper sur l'axe au maillet (pas au marteau, non mais alors !) pour immobiliser une pièce : Pour…
Valet Tray All dimensions in mm Overall Tray dimensions 120x200x200 Upper Tray 64x200x200 Lower drawer 56x200x200 Phone Slot 16x90
This model is designed to declutter your entryway or bedside table by providing a dedicated spot for your most important items. Features Four Dedicated Compartments: Sized specifically to hold a standard wallet , car key fob , house keys…
Modern Geometric Valet Tray STL – Oval Catchall Key Organizer Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and exclusive monthly releases. COMMERCIAL LİCENSE…
Got a Valeton GP 100 and wanted to place it on top of my old Marshall amp, but there was the carriyng handle in the way. So I created this simple stand for the guitar pedal. Printing instructions Print “Stab.stl” 2x with 40% infill Print…
I wouldn't turn over my keys to service personnel or valets to keep, and when turning over the key fob, they would tape the ID tag to the fob. I devised a non-operational key that clicks into the remote fob like the real key. My Hyundai…
Minimal Valet Tray for everyday use
Comic Strip Art - Prince Valiant - Princesses Karen and Valeta
I figured, if Anyone should/could be designing an EDC related item for printing, it would be me--- Errr, for those that don't know me, I've run an EDC blog for the last decade, and been (overly)active on every online forum on the topic…
A sleek, compact desktop or nightstand valet designed to keep your everyday carry items organized at an ergonomic angle. Features dedicated compartments for a standard wallet, an AirPods case, cards, and keys/misc. Works with any printer,…
This is a valet catch all tray I created for myself with inspiration from several sources. Will require a well calibrated printer to get the proper fitment for the colored inserts. The design works as intended and I use mine daily. Would…
I wanted a valet organizer for storing and organizing my vape cartridges. I couldn't find any online that I liked, so I designed my own. The design incorporates a carrousel to make full use of the center storage areas for best viewing of…
Simple and elegant. Not super functional though
English: I had a space problem in the bedroom, for years I threw my laundry on the floor and it crumpled. That has now come to an end with the valet for the wall. In addition to the 3D printing, either a round wood or an aluminum rod with…
Print the Bottom then the Top Parts included for an adjustable watch stand with phone stand all in one catch all Valet! Print Settings: Infill: 20% Layer Height: 0.2mm Material: PLA Holds Phones up to 14mm Thick
This is a valet tray to go on the side of your Qube 500. Come home and have a place to put your wallet, keys, and change. There is a 220mm version and a 100mm version. Brackets slot into slots on bottom of tray. Supports required for…
This is a simple backplate for the Sonicake Vexpress Expression Pedal. I designed it because the pedal has a protrudin mechanism on the underside and it kept moving on the pedalboard. The backplate has a cutout for that part and now it…
A one piece print. Feel free to run wild on the colours! Also check out my Ornate Catch-All Tray model!
This is a novelty Valet Box in the form of and reminiscent of a large safe. The body comes in three configurations, empty, one shelf and two shelves. This box may be scaled to suit. One caution, however, in scaling the unit down. Small…
I needed a place to hold my cars' keyfobs, motorcycle keys, lawn tractor keys, etc. Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for…
Svuotatasche, porta tutto, con più ripiani, dimensioni modeste design semplice e minimalista. Da stampare con supporti per le parti in sospensione. Creato da me con software CATIA V5.
This is a novelty Valet Box in the form of and reminiscent of a large safe. The body comes in three configurations, empty, one shelf and two shelves. This box may be scaled to suit. One caution, however, in scaling the unit down. Small…
This light switch Valet is for a dual switch installation. It provides your keys and wallet behind the switch plate, preferably next to the door where the cars are parked. If requested, I will make a Valet for a single switch panel. It…
EDC Valet tray, print a place for your keys, chapstick, wallet, pocket knife, etc.
I made this to have a place to throw all the stuff from my pockets after coming home from work. It's split in two pieces that can be superglued together, but it's not essential for the rim to stay on. Parts provided in intended print…
This stand combines with a Handskalad from Ikea to provide a unique solution for storage and display.
Simple valet tray with ¼" bit and driver storage. I typically use it for knife and watch disassembly and maintenance. I lined mine with this cork. https://a.co/d/4ag76x0 I also glued 5mm x 1mm magnets into the base of each bit holder hole.
So my family was having a storage issue for clothing so I decided to try and make some quick clothing hangars so we make some wall racks. We used just some Big Box clothing poles which gently snap into the hooks. The hooks mount on the…
Original Idea… Original Model A deterrent to the person who thinks of touching your gold, diamonds, jewelry or money, so put your wallet, keys, glasses and coin here …
Low Poly Leather style Valet Tray
I looked at about a dozen different models but most of them were too bulky for me. I need to print dozens of these things, so I wanted something that wouldn't tie up my printer all day. This design not only prints like a dream, but like…
21 Meeples dont la Grange Les chevalets sont empilables Compatibilité avec l'insert :
YOUR VALET WILL LOOK LIKE THE RENDER, NOT LIKE THE PHOTO ;) Stupid me realized I measured the height wrong AFTER printing all the parts, So I had to get creative with pipe lengths and the result looks a bit more stocky than I intended, my…
Rather than having a surprise when you open the box of AA batteries to find it near empty, this displays the inventory. The top comes off for loading and unloading or simply push a battery through a bottom slot to eject a battery. When…
This bathroom sink valet provides a convenient place to keep your morning ritual hardware (toothbrush, toothpaste, comb). It keeps these items from direct contact with horizontal surfaces that might not be perfectly clean. It has a sports…
03-18-2024 Added version 6.1. Although the previous version is slick because the leash slips into the holder, I decided to eliminate the leash slot and just use zip ties to lash the leash to the holder. This has several advantages. First…
Valet to keep your cycling lights organized when charging. For more stability, I used the “add negative volume” feature in Prusaslicer to generate cylindrical voids inside the base and paused printing at the layer height of the top of the…
This one-piece Travel Valet Tray is perfect for storing your personal belongings (wallet, jewelry, coins, etc.) on a nightstand or dresser when traveling. It opens flat for easy packing in your suitcase. The assembled tray is 5"x5"x1.5"…
This is a set of drawers and a simple peg rack to use for jewelry or other small items. This is designed for use in my Safe1 Valet Box ( https://cults3d.com/en/3d-model/home/safe1-valet-box-keepsake-box ). The drawer rails and peg rack…
Never leave the house without your keys, wallet, sunglasses, or meds again. The Go Shelf is an all-in-one entryway organizer that puts your daily essentials in one spot by the door, so your morning routine becomes grab and go. What it…
A tray to gather everyday items for going out. Inspired by Columnar Basalt Formations, like in Giant's Causeway in Ireland. I weathered the fuzzy skin parts with diluted black acryllic paint (first image), which turned out pretty cool.…
Minimalist Desk & EDC Valet Tray Tired of hunting down your keys, wallet, or watch every morning? This low-profile valet tray keeps your everyday carry tidy without taking over your desk or nightstand. Designed with clean lines, smooth…
Valet Tray This is a multi compartment organizer that is simple and practical, designed for storing everyday essentials like phones, wallets, keys, and headphones, in a neat manner making it ideal for a bedside table, desk, or foyer.…
Found a Heart Container in the wild! ❤ The ultimate gift for your Player 2. Level up your daily carry! 🎮 Whether you're exploring the Overworld or just the office, never leave home without an extra life.
There are 2 X shapes that you stand up. Then you place the pole in the center of the X shapes. Last. have fun!
Hook for Ikea KOMPLEMENT Valet hanger, print from PLA or PETG, if needed use a drop of super glue to attach permanently.
Empty your pockets into it: a faceted tray for keys, wallet, watch, earbuds and coins by the front door or on the bedside table. The walls twist from a hexagon at the base to a rotated hexagon at the rim, so every facet catches the light.…
The Story: I’m a beginner to 3D design, and this was my first "real" project. I wanted something for my desk that wasn't just another boring plastic cup. This tray has a heavy, industrial ribbed texture that feels great in the hand, and…
Found a Heart Container in the wild! ❤ The ultimate gift for your Player 2. Level up your daily carry! 🎮 Whether you're exploring the Overworld or just the office, never leave home without an extra life.
A tray to gather everyday items for going out. Inspired by Columnar Basalt Formations, like in Giant's Causeway in Ireland. I weathered the fuzzy skin parts with diluted black acryllic paint (first image), which turned out pretty cool.…
This model is designed to declutter your entryway or bedside table by providing a dedicated spot for your most important items. Features Four Dedicated Compartments: Sized specifically to hold a standard wallet , car key fob , house keys…
I needed a place to hold my cars' keyfobs, motorcycle keys, lawn tractor keys, etc. Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for…
YOUR VALET WILL LOOK LIKE THE RENDER, NOT LIKE THE PHOTO ;) Stupid me realized I measured the height wrong AFTER printing all the parts, So I had to get creative with pipe lengths and the result looks a bit more stocky than I intended, my…
Dos soportes para velas de 8.5 cm . Listo para armar, no requiere soportes.
Stem for San Valentine Rose by dfm maker UPDATE: added model optimized for 50 percent scale down. (I recommend slow print and lower flow rate). Print settings: VASE MODE PRINT material: PLA nozzle: 0.4mm layer height: 0.2mm bottom full…
