1 / 4
Ikea Skadis Wandhalter mit Langlöchern  für 2 Skadis Platten nebeneinander zu verbinden. Wallmount with 2 longholes to connect plates beside. — zdjęcie 1
1 / 4

Ikea Skadis Wandhalter mit Langlöchern für 2 Skadis Platten nebeneinander zu verbinden. Wallmount with 2 longholes to connect plates beside.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wandhalter mit Langlöchern. Zum verbinden von 2 Skadis Platten nebeneinander. mit einem Bit der lang genug ist, kann…

Ocena
5 / 5
Polubienia
11
Pobrania
66
Wydruki
1
Wyświetlenia
427
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Wandhalter mit Langlöchern. Zum verbinden von 2 Skadis Platten nebeneinander. mit einem Bit der lang genug ist, kann man die Schrauben durch die Langlöcher der Skadis Platte an der Wand fest schrauben.

Wall bracket with longholes. For connecting 2 Skadis plates next to each other. With a bit that is long enough, you can screw the screws through the elongated holes of the Skadis plate to the wall.

Print Settings

Printer Brand:

Sovol 3D

Printer:

Sovol SV06

**Rafts:**

No

Supports:

No

**Resolution:**

0,18mm

Infill:

25%

**Filament:** egal PETG egal

Notes:

Gedruckt mit einem Sowohl SV06 Plus
Ich habe Sunlu PETG verwendet.
Gedruckt bei 240°C/80°C
mit 25% infill
Layer 1 0,24mm
ab Layer 2 0,18mm
ohne raft, oder brim

I used Sunlu PETG.
Printed at 240°C/80°C
with 25% infill
Layer 1 0,24mm
from layer 2 0,18mm
without raft, or brim

Category: Tool Holders & Boxes

Tagi