1 / 4
Ikea Skadis Wandhalter mit Langlöchern  für 2 Skadis Platten nebeneinander zu verbinden. Wallmount with 2 longholes to connect plates beside. — image 1
1 / 4

Ikea Skadis Wandhalter mit Langlöchern für 2 Skadis Platten nebeneinander zu verbinden. Wallmount with 2 longholes to connect plates beside.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wandhalter mit Langlöchern. Zum verbinden von 2 Skadis Platten nebeneinander. mit einem Bit der lang genug ist, kann…

Rating
5 / 5
Likes
11
Downloads
65
Makes
1
Views
420
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Wandhalter mit Langlöchern. Zum verbinden von 2 Skadis Platten nebeneinander. mit einem Bit der lang genug ist, kann man die Schrauben durch die Langlöcher der Skadis Platte an der Wand fest schrauben.

Wall bracket with longholes. For connecting 2 Skadis plates next to each other. With a bit that is long enough, you can screw the screws through the elongated holes of the Skadis plate to the wall.

Print Settings

Printer Brand:

Sovol 3D

Printer:

Sovol SV06

**Rafts:**

No

Supports:

No

**Resolution:**

0,18mm

Infill:

25%

**Filament:** egal PETG egal

Notes:

Gedruckt mit einem Sowohl SV06 Plus
Ich habe Sunlu PETG verwendet.
Gedruckt bei 240°C/80°C
mit 25% infill
Layer 1 0,24mm
ab Layer 2 0,18mm
ohne raft, oder brim

I used Sunlu PETG.
Printed at 240°C/80°C
with 25% infill
Layer 1 0,24mm
from layer 2 0,18mm
without raft, or brim

Category: Tool Holders & Boxes

Tags