Wheel fitting for IKEA Grundtal laundry trolley bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This treaded bushing can replace the original fitting for the wheel with M8 pivot which is not very resilient.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
The original fitting got broken in a few years. Remove and replace them with this one. Print it in PETG because it needs to be pushed a bit to tight fit in the tube: make a trial to set your scale ratio to accommodate both the tube and M8 pivot part 109740 (i.e. 100,33% with my settings and filament).
This trolley “Grundtal art. 502.192.99” is no longer in production so you cannot have replacement kits from IKEA.
Note: the modelling of the M8 thread is enlarged by 0,1 mm to have the right tolerance.