1 / 11
Prusa XL Tapo Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tapo Camera mount designed for the Prusa XL 20x20 mm aluminum extrusions (V-slot rails). Compatible with EnXLosure.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Tapo Camera Mount
A custom Tapo Camera mount designed for 20x20 mm aluminum extrusions (V-slot rails), originally designed for the Prusa XL but may of course be used on any similar rail.
Compatible Camera Models:
- C200 / C210 / C211 / C220
- TC70 / TC71
- Any other camera with a similar mount type (or use it for anything else that fits).
Features:
- Easy to print
- Easy to install
- Compatible with the EnXLosure, made by Voxel3D
Suggested Print Settings:
- Material: PETG
- Infill: 15% (Gyroid infill preferred)
- Printing Orientation: Four screw holes facing down
- Supports: Yes, required for the small shelves
Assembly Instructions:
- Attach the original Tapo mount to the printed mount using the original screws. (Drill the holes if needed for alternative screws. The holes in the model are 3 x 40 mm)
- Insert two 12 mm hex screws (10 mm may also work) into the mount holes. Add a shim for each screw if available.
- Attach drop-in nuts (printable drop-in nut) to the screws
- Secure the mount to the aluminum frame.
- Install the camera onto the mount.
- Done!
Let me know if you’d like further adjustments.